Texture evolution of experimental silicon steel grades. Part I: Hot rolling

Microstructural Evolution of X45CrNiW189 Valve Steel During Hot Deformation

The hot compression tests were carried on X45CrNiW189 valve steel (X45) in the temperature range of 1000– 1200 °C and the strain rate range of 0.004 – 0.5 s-1 in order to study the high temperature softening behavior of this steel. For the exact prediction of flow stress, the effective stress-effective strain curves were obtained from experiments under various conditions. On the basis of experi...

Effect of Hot Rolling and Intermittent Annealing on the Texture Evolution of Monotectoid Bcc Zr-nb

Modeling of Cracks Presence in Steel after Hot Rolling

The optimal material processing in steel industry is difficult because of the multi-constituent and multiphase character of the commercial steels, variety of the possible processing paths, and plant specific equipment characteristics. This paper shows implementation of the genetic programming approach for crack presence modeling after rolling. The data (110 samples covering 7 different steel gr...

Case Study: Temperature Control of Hot Rolling Steel

In this case study we discuss a simple control system used for obtaining a desirable downstream surface temperature inside a hot rolling steel sheet, presented by Bao Steel in the HK Study Group with Industry, held at the City University of Hong Kong, July 2002.

Genetic Algorithms in Hot Steel Rolling for Scale Defect Prediction

Scale defects are common surface defects in hot steel rolling. The modelling of such defects is problematic and their causes are not straightforward. In this study, we investigated genetic algorithms in search for a mathematical solution to scale formation. For this research, a high-dimensional data set from hot steel rolling process was gathered. The synchronisation of the variables as well as...