The Microstructure and Mechanical Properties of FeCoNiCuMo High-Entropy Alloys

The Microstructure and Mechanical Properties of Refractory High-Entropy Alloys with High Plasticity

Refractory high-entropy alloys (RHEAs) are promising materials used at high temperature, but their low plasticity restricts their application. Based on the valence electron concentration (VEC) principle, four kinds of RHEAs (ZrTiHfV0.5Nb0.5, Zr2.0TiHfVNb2.0, ZrTiHfNb0.5Mo0.5, and ZrTiHfNb0.5Ta0.5) are designed (VEC < 4.5). The experimental results show that the plasticity of these alloys was gr...

Microstructure, Mechanical and Tribological Properties of Oxide Dispersion Strengthened High-Entropy Alloys

A novel metal matrix composite CrMnFeCoNi with Y₂O₃ as reinforcement phase was designed and manufactured by mechanical alloying and spark plasma sintering. After sintering at 900 °C for 5 min, the microstructure consisted of a FCC matrix and Y₂O₃ nanoparticles. The addition of 0.25 wt % Y₂O₃ increased the room temperature tensile strength of the CrMnFeCoNi base from 868 MPa to 1001 MPa, while t...

Effect of Alloying Elements on the Microstructure and Mechanical Properties of Austempered Ductile Iron Alloys

Effect of Alloying Elements on the Microstructure and Mechanical Properties of Austempered Ductile Iron Alloys

Effect of Aluminum on the Microstructure and Mechanical Properties of Austempered Ductile Iron Alloys