The Sinterability Improvement of Ferrous Alloy Sintered Compacts by Controlling Particle Size Distribution
نویسندگان
چکیده
منابع مشابه
Project: Controlling Particle Size and Particle Distribution in Crystalization Operations
Crystallization is a widely used technology for solid-liquid separation in the process industry. It is extensively used in the production of pharmaceuticals to separate the drug from the solvent mixture as well as to ensure that the drug crystal product conforms to size and morphology specifications. The crystal size in crystallization processes is one of the most important variables since it i...
متن کاملEffect of Slow Cooling in Reducing Pore Size in a Sintered Powder Metallurgical 6061Aluminium Alloy
The usage of powder metallurgy aluminium compacts in lieu of ferrous components in automotives helps to lower vehicle weight. The major drawback in the commercially available press sintered aluminium alloy is porosity which is mainly dependent on the powder metallurgical process parameters such as compaction pressure, sintering temperature and cooling rate after sintering. In this paper the eff...
متن کاملEffects of Temperature and Particle Size Distribution on Barite Reduction by Carbon monoxide Gas
In this research, a mineral barite powder was reduced by carbon monoxide gas and the effects of reduction time and temperature was investigated as well as barite particle size. Results showed that the best result would be feasible when the barite particle sizes are between (-70 +100) in mesh scale. The barite reduction could reach the maximum level (98%) after reduction by carbon monoxide at 85...
متن کاملSintering of Fine Oxide Powders: II, Sintering Mechanisms
Conventional and new sintering mechanisms have been porous compacts is well-known in the ceramic literature. However, several reports have been presented recently that investigated using fine powders of CeO2 and Y2O3 of excellent sinterability. We have verified the validity of Herring’s show that particle/grain size can remain essentially constant up to a density of 92%, and such a resistance t...
متن کاملStudy of the Nanometric Grain Size Distribution in Iron Compacts Obtained by Mechanical Milling
A study has been carried out on the grain size distribution of cylindrical compacts obtained by consolidation of iron powder severely deformed by mechanical milling. Consolidation has been performed in two consecutive steps: cold and hot conditions. The hot one was done at two temperatures, namely 425 and 475oC. After milling, the iron powder has a grain size of 8 nm (± 4 nm) with an average ha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 2011
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.58.45