Thermal and Kinetic Behaviors during Co-Pyrolysis of Microcrystalline Cellulose and Styrene–Butadiene–Styrene Triblock Copolymer
نویسندگان
چکیده
The interaction between various municipal solid waste components is very important for the actual treatment process. Microcrystalline cellulose (MC) and styrene–butadiene–styrene triblock copolymer (SBS) are of waste. In this paper, co-pyrolysis characteristics kinetics MC SBS with different heating rates were investigated using a thermogravimetric analyzer. overlap ratio was defined to evaluate SBS. results showed that decomposition temperature lower than during pyrolysis. SBS, an inhibitory effect, most significant when mass fraction 70% 0.9764. had almost no effect on pyrolysis MC, while delayed Adding in can significantly reduce energy required reaction.
منابع مشابه
Cellulose–Hemicellulose and Cellulose–Lignin Interactions during Fast Pyrolysis
Previously, the primary product distribution resulting from fast pyrolysis of cellulose, hemicellulose, and lignin was quantified. This study extends the analysis to the examinations of interactions between cellulose−hemicellulose and cellulose−lignin, which were determined by comparing the pyrolysis products from their native mixture, physical mixture, and superposition of individual component...
متن کاملExperimental studies of the jamming behaviour of triblock copolymer solutions and triblock copolymer-anionic surfactant mixtures.
Photon correlation spectroscopy and rheological measurements are performed to investigate the microscopic dynamics and mechanical responses of aqueous solutions of triblock copolymers and aqueous mixtures of triblock copolymers and anionic surfactants. Increasing the concentration of triblock copolymers results in a sharp increase in the magnitude of the complex moduli characterising the sample...
متن کاملThermal analysis of microcrystalline cellulose prepared from esparto grass
Alfa fibres are extracted from the plant Stippa tenacissima, or esparto grass (alfa is the Arab name for esparto), and grows in the dry regions of North Africa. It belongs to the graminacies family and grows to a height of about 1 m. These fibres are mostly used in the production of paper. Recently, they have been used as reinforcement in the production of biodegradable composites. The aim of t...
متن کاملBoundary Lubrication of PEO-PPO-PEO Triblock Copolymer Physisorbed on Polypropylene, Polyethylene, and Cellulose Surfaces
In situ lateral force microscopy (LFM) and X-ray photoelectron spectroscopy (XPS) were used to probe the lubrication behavior of an aqueous solution of poly(oxyethylene)-poly(oxypropylene)-poly(oxyethylene) (PEO-PPO-PEO) symmetric triblock copolymer on thin films of polypropylene (PP), polyethylene (PE), and cellulose. LFM experiments were carried out while the substrates were immersed in water...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Processes
سال: 2021
ISSN: ['2227-9717']
DOI: https://doi.org/10.3390/pr9081335