Thermal Performance of Horizontal Fixed Sun Shading Device
نویسندگان
چکیده
Earlier investigations on passive cooling methods applied software modelling, and the findings were not confirmed through field measurement. Hence, this study a stationary experiment real structure weather conditions employing horizontal sun shading (SDH). The purpose of was to compare performance fixed sun-shading devices put bare façade three-story terrace shophouses in Malaysia. revealed that SDH significantly improved internal thermal environment by lowering average monthly indoor air temperature (Ta) 0.98 K peak 2.11 K. is also effective during warmest sunny days, 1.23 for day. Meanwhile, reduced control room 5.40 time.When it came mean radiant (Tmrt), performed better than very hot peakover month (2.38 K) highest day (7.70 K). Finally, can be inferred worked from late at night until early morning, faster. This quiescent choice one best enhancing building's while possibly contributing decrease operational energy consumption.
منابع مشابه
Perforated Thermal Mass Shading: An Approach to Winter Solar Shading and Energy, Shading and Daylighting Performance
Direct solar irradiance may cause thermal discomfort, even in winter when the ambient temperature is low and especially for high-altitude locations with a high intensity of solar radiation. Thus winter solar shading might be required and, if used, must achieve a balance between the prevention of the transmittance of solar irradiance, the utilization of passive solar heat and the supply of adequ...
متن کاملThe Performance of Daylighting with Shading Device in Architecture Design
This paper presents the relationship between daylighting performance and shading device design in the perimeter area of buildings. In the area of tropic and sub-tropic, designers always face with the contradiction between solar heat gain and daylighting using. Factors such as different type of shading device, material reflectance, fenestration design, opening ratio, and daylight distribution wi...
متن کاملPredicted Simulation on the Lighting Energy Saving in a Classroom Using the Sun Shading as the Daylight-introducing Device
Because of the characteristics of the subtropical climate in Taiwan, the abundant daylight can be applied well on the savings of the lighting power. This study was to figure out the illumination environment indoors and to introduce the daylight as far as the inner part of rooms. The field measurement and numerical simulation were adopted. A nine-channel photometer was used to measure the illumi...
متن کاملDesign and Energy Performance of a Buoyancy Driven Exterior Shading Device for Building Application in Taiwan
Traditional dynamic shading systems are usually driven by electricity for continuously controlling the angle of blind slats to minimize the indoor solar heat gain over times. This paper proposed a novel design of buoyancy driven dynamic shading system, using only minimum amount of electricity. The energy performance and the improved thermal comfort induced by the system were simulated by Energy...
متن کاملA Hybrid Thermal Energy Storage Device , Part 2 : Thermal Performance Figures of Merit
Two figures of merit for hybrid Thermal Energy Storage (TES) units are developed: the volumetric figure of merit, Ṽ, and the temperature control figure of merit, DT̃ . A dimensional analysis shows that these quantities are related to the performance specification of the storage unit and its physical design. A previously benchmarked semi-empirical finite volume model is used to study the characte...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Sustainable Construction Engineering and Technology
سال: 2023
ISSN: ['2600-7959', '2180-3242']
DOI: https://doi.org/10.30880/ijscet.2023.14.02.021