Thermostimulated luminescence of plasma electrolytic oxidation coatings on 6082 aluminium surface
نویسندگان
چکیده
منابع مشابه
Plasma Electrolytic Oxidation Coatings on Lightweight Metals
Lightweight metals, e.g. aluminum (Al), magnesium (Mg), titanium (Ti) and their alloys are of great importance for applications in various machinery and transportation system, espe‐ cially in aerospace and automobile products due to their high strength-to-weight ratio and superior physical and chemical performances. However, their poor tribological properties, such as low wear resistance, high ...
متن کاملEffect of Plasma Electrolytic Oxidation Process as a Pretreatment on Corrosion Resistance of Polymeric Coatings Applied on Mg Alloy
In this study, Plasma Electrolytic Oxidation (PEO) at three frequencies of 500, 1000 and 3000 Hz was applied on Mg surface and the effect of PEO surface preparation on protective behavior of three types of epoxy, fusion bond epoxy (FBE) and polyurethane coatings was investigated. The microstructural and protective properties of PEO coatings were studied by SEM, potentiodynamic polarization and ...
متن کاملEffect of Plasma Electrolytic Oxidation Process as a Pretreatment on Corrosion Resistance of Polymeric Coatings Applied on Mg Alloy
In this study, Plasma Electrolytic Oxidation (PEO) at three frequencies of 500, 1000 and 3000 Hz was applied on Mg surface and the effect of PEO surface preparation on protective behavior of three types of epoxy, fusion bond epoxy (FBE) and polyurethane coatings was investigated. The microstructural and protective properties of PEO coatings were studied by SEM, potentiodynamic polarization and ...
متن کاملComparative Sem and Edx Analysis of Surface Coatings Created on Niobium and Titanium Alloys after Plasma Electrolytic Oxidation (peo)
Original scientific paper In the paper, the SEM and EDS study results of the surface coatings formed on the niobium and titanium alloys (TNZ, NiTi, Ti6Al4V) after the Plasma Electrolytic Oxidation (PEO), also known as Micro Arc Oxidation (MAO), are described. For the experiment of the PEO treatment, a non-conventional electrolyte, based on the concentrated orthophosphoric acid, was used. Copper...
متن کاملProcess Monitoring of Plasma Electrolytic Oxidation
Plasma electrolytic oxidation (PEO) is a potential technique to coat a dense ceramic oxide layer on the surface of light metals, e.g. Al, Mg or Ti. In our PEO process, Al-pieces are emerged in aqueous solutions containing dissolved silicate/alkali, e.g. KOH/NaOH and K 2 SiO 3 /Na 2 SiO 3. Using a DC-pulsed system with 20Hz, micro-arcs are induced at the surface of the pieces randomly and plasma...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Radiation Measurements
سال: 2019
ISSN: 1350-4487
DOI: 10.1016/j.radmeas.2019.02.020