Transient Internal Flow Characterization of a Bifurcated Submerged Entry Nozzle
نویسندگان
چکیده
منابع مشابه
Investigation the effects of injection pressure and compressibility and nozzle entry in diesel injector nozzle’s flow
Investigating nozzle’s orifice flow is challenging both experimentally and theoretically. This paper focuses on simulating flow inside diesel injector nozzle via Ansys fluent v15. Validation is performed with experimental results from Winkhofler et al (2001). Several important parameters such as mass flow rate, velocity profiles and pressure profiles are used for this validation. Results includ...
متن کاملSUBMERGED ENTRY NOZZLE CLOGGING DURING CONTINUOUS CASTING OF Al-KILLED STEEL
F. Tehovnik, J. Burja, B. Arh, Institute of metals and technology, Ljubljana, Slovenia, M. Knap, University of Ljubljana, Faculty of Natural Sciences and Engineering, Ljubljana, Slovenia Nozzle clogging is a common problem in the production of continuously cast Al-killed steels. Clogging occurs when there are solid inclusions in molten steel at casting temperatures. SENs (Submerged entry nozzle...
متن کاملHigh-Speed Internal Nozzle Flow Visualization of Flashing Jets
Flashing or thermodynamic breakup of a liquid jets occurs when a pressurized, subcooled or saturated liquid is released to a lower pressure, resulting in violent vapor nucleation, expansion, and breakup of the liquid phase. Flashing is known to produce very fine droplet atomization, often not possible by other means. Despite its usefulness as an atomization method, the fundamental processes inv...
متن کاملThe Effect of Transient Nozzle Flow on Detonation Tube Impulse
Impulse generation with gaseous detonation requires conversion of chemical energy into mechanical energy. Because of the poor performance of straight detonation tubes compared to conventional propulsion systems and the success of using nozzles on rocket engines, the effect of nozzles on detonation tubes is being investigated. The first experimental investigation measuring impulse by gaseous det...
متن کاملAeroelastic Modeling of a Nozzle Startup Transient
Lateral nozzle forces are known to cause severe structural damage to any new rocket engine in development during test. While three-dimensional, transient, turbulent, chemically reacting computational fluid dynamics methodology has been demonstrated to capture major side load physics with rigid nozzles, hot-fire tests often show nozzle structure deformation during major side load events, leading...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2006
ISSN: 0915-1559,1347-5460
DOI: 10.2355/isijinternational.46.1183