Ultrasonic soldering of Cu alloy using Ni-foam/Sn composite interlayer
نویسندگان
چکیده
منابع مشابه
Corrosion Resistance Enhancement of AZ91 Magnesium Alloy Using Ni-P Interlayer and Electrophoretic Deposited 3YSZ Coating
The zirconia stabilized by 3mol % Y2O3 (3YSZ) was applied onto the surface of the magnesium alloy AZ91D using electrophoretic deposition (EPD) from a non- aqueous solution. A Ni-P interlayer between the substrate and YSZ coating was also prepared by electroless plating. Finally, coatings were heat treated in control atmosphere at 400 °C. The preparation, microstructure and corrosion resistance ...
متن کاملOxidation resistance of graphene-coated Cu and Cu/Ni alloy.
The ability to protect refined metals from reactive environments is vital to many industrial and academic applications. Current solutions, however, typically introduce several negative effects, including increased thickness and changes in the metal physical properties. In this paper, we demonstrate for the first time the ability of graphene films grown by chemical vapor deposition to protect th...
متن کاملPreparation of Ni/Cu composite nanowires
Ni/Cu composite nanowires were synthesized in an aqueous solution for the first time. The synthetic process consisted of two steps. Firstly, pure nickel nanowires were prepared through chemical reduction in solution under a magnetic field. Secondly, copper was reduced on the surface of the nickel nanowires, during which Ni/Cu composite nanowires with an average length of 80 µm and diameter of a...
متن کاملCross-interaction of Interfacial Reactions in Ni (au/ni/cu)-snag-cu Solder Joints during Reflow Soldering and Thermal Aging
The coupling effect of interfacial reactions between two pads in Ni-SnAg-Cu and Au/Ni/Cu-SnAg-Cu solder joints was investigated in this paper. After reflow soldering, a large amount of Cu can diffuse across the solder joint to the opposite pad to form (Cu,Ni)6Sn5 IMC on the Ni pad in Ni-SnAg-Cu solder joint. A little Ni can also be detected in Cu6Sn5 layer, which contains some trapped solder, o...
متن کاملUltrasonic Examination of a Weld Repair in Ni-based Alloy
The anisotropic, heterogeneous and coarse granular structures of austenitic stainless steel welds lead to important disturbances of the ultrasonic propagation: beam skewing and splitting, attenuation, backscattering and spurious echoes. These disturbances have been studied by EDF R&D for a few years in order to improve the ultrasonic NDT in nuclear applications. In particular, a methodology for...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Ultrasonics Sonochemistry
سال: 2018
ISSN: 1350-4177
DOI: 10.1016/j.ultsonch.2018.03.005