Validation of mineral analytical method for food composition data‐up construction (1043.5)

Analytical Method Validation for Biopharmaceuticals

semi-analytical solution for static and forced vibration problems of laminated beams through smooth fundamental functions method

در این پایان نامه روش جدیدی مبتنی بر روش حل معادلات دیفرانسیل پارهای بر اساس روش توابع پایه برای حل مسایل ارتعاش اجباری واستاتیک تیرها و صفحات لایه ای ارایه شده است که می توان تفاوت این روش با روش های متداول توابع پایه را در استفاده از توابع هموار در ارضاء معادلات حاکم و شرایط مرزی دانست. در روش ارایه شده در این پایاننامه از معادله تعادل به عنوان معادله حاکم بر رفتار سیستم استفاده شده است که مو...

Analytical Method Validation

In pharmaceutical industries, the validation of analytical methods is used to demonstrate that the method is fitted for its purpose; it must follow a plan which includes scope, performance characteristics, and acceptance limits. Analytical methods need to be validated or revalidated prior to their introduction into routine analyses (release of batch). The overarching philosophy in current good ...

Development and Validation of a Terbium-Sensitized Luminescence Analytical Method for Deferiprone

A sensitive fluorometric method for the determination of deferiprone (DFP) based on the formation of a luminescent complex with Tb3+ ions in aqueous solutions is reported. The maximum excitation and emission wavelengths were 295 and 545 nm, respectively. The effects of various factors on the luminescence intensity of the system were investigated and optimized, then under the optimum conditions,...

Validation of an Analytical Method for Determination of 13 priority polycyclic aromatic hydrocarbons in mineral water using dispersive liquid-liquid microextraction and GC-MS

Dispersive liquid liquid microextraction (DLLME) combined with gas chromatography–mass spectrometry (GC–MS) was used for the extraction and determination of 13 polycyclic aromatic hydrocarbons (PAHs) in mineral water samples. In this procedure, the suitable combination of extraction solvent (500 µL chloroform) and disperser solvent (1000 µL acetone) were quickly injected into the water sample (...