Voltage Regulating Strategy of a New LCC/S+L Inductive Power Transfer System

نویسندگان

چکیده

Abstract In the voltage control of inductive power transfer (IPT) system, a cascaded DC-DC converter is normally adopted which reduces density. However, wireless communication between transmitter and receiver may lead to delay as well instability. This paper proposes new LCC/S+L resonance topology for IPT can realize single-stage regulation on receiving side with both buck boost capability. Based fundamental wave analysis method, this analyzes working principle resonant topology. Then strategy phase shift angle bridges within obtained by ends series inductor load vector. It verified simulation that proposed achieve output 300-500 V constant 375 input DC voltage.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A New System of Contactless Power Transfer with Low Voltage Stress and Parasitic Capacitors Effect

In this paper, a high frequency contactless power transfer (CPT) system is designed with ∅2 inverter drive. This system works in 30MHz frequency and 380W power with low voltage stress and considers the inductive link parasitic capacitor effect. In the design, we formulated the inverter equations first and then suggested another design for the transmitter and the receiver coils as the energy tra...

متن کامل

Long range inductive power transfer system

We report upon a recently developed long range inductive power transfer system (IPT) designed to power remote sensors with mW level power consumption at distances up to 7 m. In this paper an inductive link is established between a large planar (1 x 1 m) transmit coil (Tx) and a small planer (170 x 170 mm) receiver coil (Rx), demonstrating the viability of highly asymmetrical coil configurations...

متن کامل

Multiparameter Monitoring and Fault Indication Using Inductive Power Transfer System

— The paper aims at demonstrating communication capabilities of IPT. For this data communication is performed between two modules using the concept of IPT. IPT was deemed to be the best solution to the system houses a multi parameter acquisition module such as temperature, speed, voltage, current and data transfer from the motor. The receiver side is another microcontroller coupled to an induct...

متن کامل

GA Based PID Controller for Bidirectional Inductive Power Transfer System

Inductive power transfer technology is an efficient mean of transferring energy from one system to another wireless or another contactless. This technology has ability to operate in hostile environments being unaffected dirt and moisture.IPT systems are used in numerous applications. Recently developing IPT based systems for wireless charging of electrical vehicles which is more convenient and ...

متن کامل

Enhancement of Power System Voltage Stability Using New Centralized Adaptive Load Shedding Method

This paper presents a new centralized adaptive method under frequency load shedding. Sometimes, after initial frequency drop following severe disturbances, although the system frequency returns to its permissible value, however, the system might become unstable due to voltage problems. In this regard, the paper proposes a new centralized adaptive load shedding method to enhance the voltage stab...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of physics

سال: 2023

ISSN: ['0022-3700', '1747-3721', '0368-3508', '1747-3713']

DOI: https://doi.org/10.1088/1742-6596/2564/1/012026