X-ray waveguide nanostructures: Design, fabrication, and characterization

Fabrication and characterization of branched carbon nanostructures

Carbon nanotubes (CNTs) have atomically smooth surfaces and tend not to form covalent bonds with composite matrix materials. Thus, it is the magnitude of the CNT/fiber interfacial strength that limits the amount of nanomechanical interlocking when using conventional CNTs to improve the structural behavior of composite materials through reinforcement. This arises from two well-known, long standi...

Fabrication and Optical Characterization of Metal Nanostructures

Precision microcomb design and fabrication for x-ray optics assembly

Silicon microcombs developed at our laboratory for the precision alignment and assembly of large-area foil optics have previously been demonstrated to achieve submicron-level assembly repeatability with submillimeter-thick flat substrates. In this article we report on a double-side deep reactive-ion etch fabrication process using silicon-on-insulator wafers which was developed to improve the mi...

Sub-10 nm beam confinement by X-ray waveguides: design, fabrication and characterization of optical properties

The propagation of hard X-ray synchrotron beams in waveguides with guiding layer diameters in the 9-35 nm thickness range has been studied. The planar waveguide structures consist of an optimized two-component cladding. The presented fabrication method is suitable for short and leak-proof waveguide slices with lengths (along the optical axis) in the sub-500 µm range, adapted for optimized trans...

design, simulation and fabrication of 2x2 microstrip patch antenna array fed by substrate integrated waveguide at x band

this paper describes the design of a 2x2 micro strip patch antenna array in the frequency of 9.5ghz for radar applications, using substrate integrated waveguide, siw, for feeding network. the micro strip patches are aperture-coupled with the feeding network of siw. the feeding network consisting of a perpendicular coax-to-siw transition and two y-junction power dividers. the antenna is simulate...