experimental investigation of reverse fault rupture – rigid shallow foundation interaction

نویسندگان

s.m. moosavi international institute of earthquake engineering and seismology (iiees)

m.k. jafari international institute of earthquake engineering and seismology (iiees)

m. kamalian international institute of earthquake engineering and seismology (iiees)

a. shafiee international institute of earthquake engineering and seismology (iiees)

چکیده

ground differential movements due to faulting have been observed to cause damage to engineered structures and facilities. although surface fault rupture is not a new problem, there are only a few building codes in the world containing some type of provisions for reducing the risks. fault setbacks or avoidance of construction in the proximity to seismically active faults, are usually supposed as the first priority. in this paper, based on some 1-g physical modelling tests, clear perspectives of surface fault rupture propagation and its interaction with shallow rigid foundations are presented. it is observed that the surface fault rupture could be diverted by massive structures seated on thick soil deposits. where possible the fault has been deviated by the presence of the rigid foundation, which remained undisturbed on the footwall. it is shown that the setback provision does not give generally enough assurance that future faulting would not threaten the existing structures.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Investigating surface fault Rupture Hazard Mitigation for shallow foundations by EPS wall using Numerical studies

Observing destroyed engineered structures and induced fatality due to faulting motivated engineers to consider possible solution for reducing damage to structures. Mitigations countermeasures should be applied when elusion is not possible. Finite element analyses verified through centrifuge model experiments is implemented in this study. Considering different fault dip Angel, critical position ...

متن کامل

Numerical analyses of fault–foundation interaction

Field evidence from recent earthquakes has shown that structures can be designed to survive major surface dislocations. This paper: (i) Describes three different finite element (FE) methods of analysis, that were developed to simulate dip slip fault rupture propagation through soil and its interaction with foundation–structure systems; (ii) Validates the developed FE methodologies against centr...

متن کامل

Normal Fault Rupture Interaction with Strip Foundations

Observations after earthquakes where surface fault ruptures crossed engineering facilities reveal that some structures survived the rupture almost unscathed. In some cases, the rupture path appears to divert, “avoiding” the structure. Such observations point to an interaction between the propagating rupture, the soil, and the foundation. This paper i develops a two-step nonlinear finite-element...

متن کامل

Preliminary design recommendations for dip-slip fault–foundation interaction

The article outlines the main findings and conclusions of the QUAKER research project and other related studies on the behaviour of foundations built on top of a rupturing dip-slip fault. Although emphasis is placed on normal faults, the derived conclusions are valid for reverse faults, as well. A key conclusion is that it is quite feasible to design a foundation to withstand an underneath rupt...

متن کامل

Experimental investigation of face stability of shallow tunnels in sand

The face stability of shallow tunnels was investigated with small-scale model experiments at single gravity. Aim of the research was to detect the evolution of failure mechanisms in dense and loose soil samples with varying overburden above the tunnel. Moreover, the quality of proposed theoretical/numerical approaches for the determination of a necessary support pressure pf was assessed. The re...

متن کامل

Experimental Investigation of Energy Consumption and Performance of Reverse Osmosis Desalination using Design of Experiments Method

To control the quality of reverse osmosis (RO) product water and reduce operational costs and environmental impacts by increasing the system’s energy efficiency, it is necessary to identify the influence of process parameters on energy consumption and permeate water quality. This paper introduces a case study focused on the application of Design of Experiments (DOE) method in an industrial-scal...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
international journal of civil engineering

جلد ۸، شماره ۲، صفحات ۸۵-۹۸

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023