technical effects of air cooled blast furnace slag on asphalt mixtures

نویسندگان

a. esmaeili kalalagh

ministry of roads and transportation, tehran, iran. s.m. marandi

asst. prof., department of civil engineering, shahid bahonar university, kerman, iran. p. safapour

lecturer, department of computer engineering, shahid bahonar university, kerman, iran.

چکیده

air cooled blast furnace slag is a by product made of gradually air cooled molten blast furnace slag, and is often stored in stockpiles near the iron mills and usually occupy a wide area around the iron mills. from this perspective the further use of these materials can have its own merits. air cooled blast furnace slag can be used in asphalt mixtures because of their proper frictional properties. this research is conducted to investigate the effect of air cooled blast furnace slag on technical characteristics of asphalt mixtures and compare the results with the traditional asphalt mixtures. two series of marshal and texas boiling tests were carried out in the laboratory. three types of aggregates (air cooled blast furnace slag, siliceous gravel, lime gravel) with two types of dense graded and open graded were used. the frictional properties of the asphalt mixed with air cooled blast furnace slag materials were evaluated by using the british pendulum, and the sand patch method. resistance to moisture was also determined in accordance to texas boiling test. results showed that by increasing percentage of air cooled blast furnace slag in asphalt mixtures, marshall stability, flexibility and skid resistance augmented. also texas boiling tests indicated that asphalt mixtures have a good resistance to stripping.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Technical Effects of Air Cooled Blast Furnace Slag on Asphalt Mixtures

Air cooled blast furnace slag is a by product made of gradually air cooled molten blast furnace slag and is often stored in stockpiles near the iron mills and usually occupy a wide area around the iron mills. From this perspective the further use of these materials can have its own merits. Air cooled blast furnace slag can be used in asphalt mixtures because of their proper frictional propertie...

متن کامل

Effects of Partial Substitution of Styrene-butadiene-styrene with Granulated Blast-furnace Slag on the Strength Properties of Porous Asphalt

The present experimental research investigates the feasibility of partial substitution of styrene-butadiene-styrene (SBS) with ground granulated blast-furnace slag (GGBS) for the modification of bitumen and porous asphalt mixtures. The control asphalt mixture and the seven modified porous asphalt mixtures have been analyzed separately and their performance was compared. Modified bitumen and asp...

متن کامل

Ground Granulated Blast Furnace Slag

1. Ground Granulated Blast Furnace Slag Ground Granulated Blast Furnace Slag (GGBFS) is a by product of the steel industry. Blast furnace slag is defined as “the non-metallic product consisting essentially of calcium silicates and other bases that is developed in a molten condition simultaneously with iron in a blast furnace.” [1] In the production of iron, blast furnaces are loaded with iron o...

متن کامل

EFFECTS OF SILICA MODULUS AND ALKALI CONCENTRATION ON ACTIVATION OF BLAST-FURNACE SLAG

Abstract: The use of alkali-activated cementitious materials especially over the past decades has significantly been increased. The goal of this research is to investigate the effects of silica modulus and alkali concentration on alkali-activation of blast-furnace slag. In this research, the most important physical characteristics of cementitious systems, i.e. the 28-day compressive strength...

متن کامل

Electric Arc Furnace Slag and Blast Furnace Dust, Use for the Manufacture of Asphalt Concrete for Roads

This paper analyzes how feasible it is to use electric arc furnace slag as coarse aggregate, and blast furnace dust as fine aggregate in the manufacture of hot asphalt concrete for roads. Three mixtures were designed using the Ramcodes methodology, the M1 mixture of control with conventional materials, the M2 mixture replacing 50% and the M3 mixture replacing 100% of the conventional aggregates...

متن کامل

The Study of Ion Adsorption by Amorphous Blast Furnace Slag

In this study, the blast furnace slag was used as absorbing bed and then, its ionic adsorption was studied. For this reason, various experimental parameters such as pH, contact time and the primary ion concentration were investigated. The remaining concentrations of ions such as; Mn2+ and Fe2+ in water were measured by atomic adsorption spectroscopy. The chemical and p...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
پژوهشنامه حمل و نقل

جلد ۲، شماره ۳، صفحات ۰-۰

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023