time-distance optimal trajectory planning for mobile robots on straight and circular paths

نویسندگان

hossein barghi jond

adel akbarimajd

nurhan gursel ozmen

چکیده

trajectories generally used to describe the space and time required to perform a desired motion task for a mobile robot or manipulator system. in this paper, we considered a cubic polynomial trajectory for the problem of moving a mobile robot from its initial position to a goal position in over a continuous set of time. along the path, the robot requires to observe a certain acceleration profile. then, we formulated an optimization approach to generate optimal trajectory profiles for the mobile robot in the cases of maximum-distance and minimum-time problems. the optimization problem presented to find the trajectory strategy that would give the robot time-distance optimality to move from a start point to an end point where the robot should stay inside its acceleration limits all the time. the problem solved analytically because as it is well known, numerical solutions and iterative methods are time-consuming, therefore, our closed-form solutions demand low computation time. finally, the results are verified by simulations.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Time-Distance Optimal Trajectory Planning For Mobile Robots On Straight And Circular Paths

Trajectories generally used to describe the space and time required to perform a desired motion task for a mobile robot or manipulator system. In this paper, we considered a cubic polynomial trajectory for the problem of moving a mobile robot from its initial position to a goal position in over a continuous set of time. Along the path, the robot requires to observe a certain acceleration profil...

متن کامل

polynomial optimal trajectory planning and obstacle aviodance for omni-directional mobile robots in dynamic environments

this paper presents a parameterization method to optimal trajectory planning and dynamic obstacle avoidance for omni-directional robots. the aim of trajectory planning is minimizing a quadratic cost function while a maximum limitation on velocity and acceleration of robot is considered. first, we parameterize the trajectory using polynomial functions with unknown coefficients which transforms t...

متن کامل

Direct Optimal Motion Planning for Omni-directional Mobile Robots under Limitation on Velocity and Acceleration

This paper describes a low computational direct approach for optimal motion planning and obstacle avoidance of Omni-directional mobile robots within velocity and acceleration constraints on the robot motion. The main purpose of this problem is the minimization of a quadratic cost function while limitation on velocity and acceleration of robot is considered and collision with any obstacle in the...

متن کامل

Optimal Trajectory Planning of a Box Transporter Mobile Robot

This paper aims to discuss the requirements of safe and smooth trajectory planning of transporter mobile robots to perform non-prehensile object manipulation task. In non-prehensile approach, the robot and the object must keep their grasp-less contact during manipulation task. To this end, dynamic grasp concept is employed for a box manipulation task and corresponding conditions are obtained an...

متن کامل

Near-time-optimal trajectory planning for wheeled mobile robots with translational and rotational sections

We derive a near-time-optimal trajectory for wheeled mobile robots (WMRs) satisfying the following: 1) initial and final postures/velocities as well as 2) battery voltage and armature current constraints, under assumptions of simplified dynamics and constant translational/rotational velocity sections. We use a simplified dynamic model for WMRs neglecting inductances of motor armatures and divid...

متن کامل

Optimal trajectory planning for industrial robots

An analysis of the results of an algorithm for optimal trajectory planning of robot manipulators is described in this paper. The objective function to be minimized is a weighted sum of the integral squared jerk and the execution time. Two possible primitives for building the trajectory are considered: cubic splines or fifth-order B-splines. The proposed technique allows to set constraints on th...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
journal of advances in computer research

ناشر: sari branch, islamic azad university

ISSN 2345-606X

دوره 5

شماره 2 2014

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023