optimization of beam orientation and weight in radiotherapy treatment planning using a genetic algorithm

نویسندگان

reza faghihi assistant professor, medical radiation department and radiation research center, school of engineering, shiraz university, shiraz, iran

mohammad amin mosleh-shirazi assistant professor, radiotherapy department and center for research in medical physics and biomedical engineering, shiraz university of medical sciences, shiraz, iran

fatemeh moradi-mocarram m.sc. in medical radiation, school of engineering, shiraz university, shiraz, iran

چکیده

introduction: the selection of suitable beam angles and weights in external-beam radiotherapy is at present generally based upon the experience of the planner. therefore, automated selection of beam angles and weights in forward-planned radiotherapy will be beneficial. material and methods: in this work, an efficient method is presented within the matlab environment to investigate how to improve the dose distributions by selecting suitable coplanar beam angles and weights for the beam. in the beam angle and weight selection algorithm, the optimal beam angles and weights correspond to the lowest objective function value of the dose distributions of each group of candidate beams. optimal weights and angles reach a balance between all the objectives. in this work, we used a genetic algorithm and adopted a real-number encoding method to represent both beam weights and angles with an assignable number of repetitions. for the evolution of this algorithm, we used both monophasic and biphasic methods. in monophasic evolution, the chromosome containing the weights and angles is evolved in a single phase. in biphasic evolution, the chromosome is evolved while keeping one parameter (e.g., weight) constant and then, in the second phase, the evolution is continued while keeping the other parameter (e.g., angle) constant. the dose calculation was carried out using “correction-based techniques”. result: simple and simulated clinical cases are presented to test the algorithm. they show that the biphasic evolution requires more computation time compared to monophasic (typically 40 and 20 minutes respectively) but results in a better optimization. conclusion: the results show the efficacy of the algorithm and its fairly acceptable computation time.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Optimization of Beam Orientation and Weight in Radiotherapy Treatment Planning using a Genetic Algorithm

Introduction: The selection of suitable beam angles and weights in external-beam radiotherapy is at present generally based upon the experience of the planner. Therefore, automated selection of beam angles and weights in forward-planned radiotherapy will be beneficial. Material and Methods: In this work, an efficient method is presented within the MATLAB environment to investigate how to improv...

متن کامل

Production Planning Optimization Using Genetic Algorithm and Particle Swarm Optimization (Case Study: Soofi Tea Factory)

Production planning includes complex topics of production and operation management that according to expansion of decision-making methods, have been considerably developed. Nowadays, Managers use innovative approaches to solving problems of production planning. Given that the production plan is a type of prediction, models should be such that the slightest deviation from their reality. In this ...

متن کامل

Robot Path Planning Using Cellular Automata and Genetic Algorithm

In path planning Problems, a complete description of robot geometry, environments and obstacle are presented; the main goal is routing, moving from source to destination, without dealing with obstacles. Also, the existing route should be optimal. The definition of optimality in routing is the same as minimizing the route, in other words, the best possible route to reach the destination. In most...

متن کامل

A Genetic Algorithm approach to Full Beam Configuration Inverse Planning in Coplanar Radiotherapy

A unified evolutionary approach to coplanar radiotherapy inverse planning is proposed. It consists of a genetic algorithm-based framework that solves with little modification treatment planning for three different kinds of radiation therapy: conformal, socalled aperture-based and intensity modulated. Thanks to evolutionary optimisation techniques we have been able to search for full beam config...

متن کامل

Comparing the results of 3D treatment planning and practical dosimetry in craniospinal radiotherapy using Rando phantom

Background: Craniospinal radiotherapy faces technical challenges which are due to the sensitivity of the location in which the gross tumor is, and to organs at risk around planning target volume. Using modern treatment planning systems causes a reduction in the complexities of the treatment techniques. The most effective method to assess the dosimetric accuracy and the validity of the ...

متن کامل

A Response Surface Approach to Beam Orientation Optimization in Intensity-Modulated Radiation Therapy Treatment Planning

W view the beam orientation optimization (BOO) problem in intensity modulated radiation therapy (IMRT) treatment planning as a global optimization problem with expensive objective function evaluations. We propose a response surface method that, in contrast with other approaches, allows for the generation of problem data only for promising beam orientations as the algorithm progresses. This enab...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
iranian journal of medical physics

جلد ۶، شماره ۲، صفحات ۵۱-۵۸

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023