Control of Nanoparticle Release Kinetics from 3D Printed Hydrogel Scaffolds
نویسندگان
چکیده
The convergence of biofabrication with nanotechnology is largely unexplored but enables geometrical control of cell-biomaterial arrangement combined with controlled drug delivery and release. As a step towards integration of these two fields of research, this study demonstrates that modulation of electrostatic nanoparticle-polymer and nanoparticle-nanoparticle interactions can be used for tuning nanoparticle release kinetics from 3D printed hydrogel scaffolds. This generic strategy can be used for spatiotemporal control of the release kinetics of nanoparticulate drug vectors in biofabricated constructs.
منابع مشابه
A Bioactive Hydrogel and 3D Printed Polycaprolactone System for Bone Tissue Engineering
In this study, a hybrid system consisting of 3D printed polycaprolactone (PCL) filled with hydrogel was developed as an application for reconstruction of long bone defects, which are innately difficult to repair due to large missing segments of bone. A 3D printed gyroid scaffold of PCL allowed a larger amount of hydrogel to be loaded within the scaffolds as compared to 3D printed mesh and honey...
متن کاملA deductive kinetic study of diclofenac release from chitosan-based magnetic nanocomposite hydrogels
A descriptive study of isothermal kinetics of diclofenac release from chitosan-g-acrylic acid (Chit-AA) hydrogel and chitosan-g-(acrylic acid-co-[2-(acryloyloxy)ethyl]trimethylammonium chloride) (Chit-AA-AETM) hydrogel was carried out. Isothermal kinetic curves for diclofenac release from both hydrogels in distilled water at various temperatures of 20-42°C were studie...
متن کاملSynthesis and structural properties of Polyvinylpyrrolidone based nanocomposite hydrogels for isoniazid drug delivery
In this study, several examples of hydrogels and nanocomposite hydrogels based on PVP with different content of montmorillonite nanoclay were prepared. Then, the swelling of hydrogels and kinetics of drug delivery of hydrogel in an environment similar to the body (pH 7.4) were examined. The effect of nanoparticle different percentages on the hydrogel was clearly observed. Then kinetics of drug ...
متن کاملComputer-aided multiple-head 3D printing system for printing of heterogeneous organ/tissue constructs.
Recently, much attention has focused on replacement or/and enhancement of biological tissues via the use of cell-laden hydrogel scaffolds with an architecture that mimics the tissue matrix, and with the desired three-dimensional (3D) external geometry. However, mimicking the heterogeneous tissues that most organs and tissues are formed of is challenging. Although multiple-head 3D printing syste...
متن کاملEvaluation of PBS Treatment and PEI Coating Effects on Surface Morphology and Cellular Response of 3D-Printed Alginate Scaffolds
Three-dimensional (3D) printing is an emerging technology for the fabrication of scaffolds to repair/replace damaged tissue/organs in tissue engineering. This paper presents our study on 3D printed alginate scaffolds treated with phosphate buffered saline (PBS) and polyethyleneimine (PEI) coating and their impacts on the surface morphology and cellular response of the printed scaffolds. In our ...
متن کامل