Mppt Controlled Dc-Dc Converter Using Passive Absorption Circuit
نویسندگان
چکیده
This paper introduces the use of the voltage multiplier technique and passive absorption circuit applied to the non-isolated dc-dc converter in order to obtain high efficiency and high voltage gain. A passive absorption circuit is inserted in the interleaved flyback converter to transfer the leakage energy to load. The operation principle of the circuit is explained. This paper also deals with MPPT controlled high step up dc-dc converter. The switching element used in the flyback converter is MOSFETs, which is completely on and completely off. This is because MOSFET has high power rating and high switching speed. Moreover, high voltage conversion ratio is achieved. The simulated results are presented with R load.
منابع مشابه
Maximum power point tracking CMOS circuit to connect a solar cell into a solid-state battery
This paper presents a Maximum Power Point Tracking (MPPT) circuit in CMOS technology for integration into an energy harvesting solution, comprising a solid-state thinfilm lithium battery fabricated in the back-side of a plastic solar-cell. The MPPT CMOS circuit is required in the energy transfer process from the solar cell to the battery. The MPPT circuit was designed in the 0.7 μm CMOS process...
متن کاملA Novel Algorithm for MPPT for PV Application System by use of Direct Control Method
Photovoltaic (PV) cell converts sunrays into electrical energy, which has non-linear I-V characteristics. For extracting maximum power from photovoltaic (PV) array for varying environmental conditions, it is necessary to use MPPT tracker. The MPPT consists of DC-DC converter and MPPT algorithm, DC-DC converter is inserted between solar panel and load or battery. The task of MPPT tracker is to m...
متن کاملSliding Mode MPPT Based Control For a Solar Photovoltaic system
---------------------------------------------------------------------***--------------------------------------------------------------------Abstract –This paper proposes the controlling of the photovoltaic (PV) system by sliding mode control(SMC). Here, open circuit voltage MPPT technique is used to track maximum power point. There is a difficulty in tracking the maximum power point of the phot...
متن کاملHigh Efficiency Photovoltaic Power Controller Using Mppt and Buck Boost Converter
The maximum power point tracking (MPPT) is used in photovoltaic system to maximize the photovoltaic array output power , irrespective of temperature , IR radiation, conditions and electrical characteristics of the load. A new MPPT system is developed consisting of DC to DC converter, which is controlled by microcontroller based unit. There are two charging stages for the proposed PV charger. At...
متن کاملCircuit Simulation for Solar Power Maximum Power Point Tracking with Different Buck-Boost Converter Topologies
The power converter is one of the essential elements for effective use of renewable power sources. This paper focuses on the development of a circuit simulation model for maximum power point tracking (MPPT) evaluation of solar power that involves using different buck-boost power converter topologies; including SEPIC, Zeta, and four-switch type buck-boost DC/DC converters. The circuit simulation...
متن کامل