TIE-25: Striae in optical glass
ثبت نشده
چکیده
Optical glasses from SCHOTT are well-known for their very low striae content. Even in raw production formats, such as blocks or strips, requirements for the most demanding optical systems are met. Striae intensity is thickness dependent. Hence, in finished lenses or prisms with short optical path lengths, the striae effects will decrease to levels where they can be neglected completely, i.e. they become much smaller than 10 nm optical path distortion.
منابع مشابه
TIE-31: Mechanical and thermal properties of optical glass
The density of optical glass varies from 2.39 for N-BK10 to 6.03 for SF66. In most cases glasses with higher densities also have higher refractive indices (e.g. SF type glasses). The density is mainly determined by the chemical composition of the glass. To a small amount the density is influenced by the annealing conditions of the glass near the transformation temperature. Due to the thermal ex...
متن کاملExperimental Investigation of Subsurface Damages Made by Cup Grinding and Lapping Process of Optical Glass BK7 in Ductile Mode
Conventional material removal of BK7 optical glass will normally result in brittle fracture at the surface, generating severe subsurface damage and poor surface finish. Subsurface damages induced by grinding strongly influence the mechanical strength and optical quality of optical glasses. However, through ductile mode grinding it is possible to reduce the surface and subsurface cracks. It is m...
متن کاملExperimental Investigation of Subsurface Damages Made by Cup Grinding and Lapping Process of Optical Glass BK7 in Ductile Mode
Conventional material removal of BK7 optical glass will normally result in brittle fracture at the surface, generating severe subsurface damage and poor surface finish. Subsurface damages induced by grinding strongly influence the mechanical strength and optical quality of optical glasses. However, through ductile mode grinding it is possible to reduce the surface and subsurface cracks. It is m...
متن کاملDispersion and Nonlinearity in Ultra-Optical Ga2O3 and TiO2-Bi2O3-PbO Glass Systems
Dispersion, as the characteristic variation of refractive index with wavelength, is more pronounced, where the wavelength is approaching to the absorption band. In ultra-optical glasses, the nonlinear refractive index, concerning to the light intensity dependent phenomenon, becomes considerable. Here, two ultra-optical property glass systems; TiO2-Bi2O3-PbO (TBP...
متن کاملExperimental Investigation of the Surface Roughness in Grinding of BK7 Optical Glass in Brittle Mode
Surface roughness is a significant parameter which determines the efficiency of optical components. Surface damages induced by grinding strongly influence the mechanical strength and optical quality of optical glasses. It is meaningful to rapid evaluate the surface roughness through the measurement of different grinding parameters. In this study, a cup diamond wheel (D64) is used in grinding pr...
متن کامل