Response Surface Based Optimization of Toughness of Hybrid Polyamide 6 Nanocomposites
نویسندگان
چکیده
Toughening of polyamide 6 (PA6)/ Nanoclay (NC) nanocomposites with styrene-ethylene/butadiene-styrene copolymer (SEBS) using maleated styrene-ethylene/butadiene-styrene copolymer (mSEBS)/ as a compatibilizer were investigated by blending them in a co-rotating twin-screw extruder. Response surface method of experimental design was used for optimizing the material and processing parameters. Effect of four factors, including SEBS, mSEBS and NC contents as material variables and order of mixing as a processing factor, on toughness of hybrid nanocomposites were studied. All the prepared samples showed ductile behavior and low temperature Izod impact toughness of some of the hybrid nanocomposites demonstrated 900% improvement compared to the PA6 matrix while the modulus showed maximum enhancement of 20% compared to the pristine PA6 resin. Keywords—Hybrid nanocomposites, PA6, SEBS rubber, toughness.
منابع مشابه
Surface Roughness Optimization of Polyamide-6/Nanoclay Nanocomposites Using Artificial Neural Network: Genetic Algorithm Approach
During the past decade, polymer nanocomposites attracted considerable investment in research and development worldwide. One of the key factors that affect the quality of polymer nanocomposite products in machining is surface roughness. To obtain high quality products and reduce machining costs it is very important to determine the optimal machining conditions so as to achieve enhanced machining...
متن کاملApplication of response surface methodology for optimization of fluoride adsorption from aqueous solution using MgO-based nanocomposites
Deleterious effect of high concentration fluoride in water resources on the healthof human. The MgO supported Fe-Co-Mn nanoparticles were produced via coprecipitationmethod and characterized by SEM and FTIR techniques. In the work,the adsorption process optimization was performed by response surface modelingwith the help of Minitab 16 software. The effect of independent ...
متن کاملSynthesis and Characterization of Aromatic–Aliphatic Polyamide Nanocomposite Films Incorporating a Thermally Stable Organoclay
Nanocomposites were synthesized from reactive thermally stable montmorillonite and aromatic-aliphatic polyamide obtained from 4-aminophenyl sulfone and sebacoyl chloride. Carbonyl chloride terminal chain ends were generated using 1% extra sebacoyl chloride that could interact chemically with the organoclay. The distribution of clay in the nanocomposites was investigated by XRD, SEM, and TEM. Me...
متن کاملModeling and Optimization of Hybrid HIR Drying Variables for Processing of Parboiled Paddy Using Response Surface Methodology
The effects of hot air temperature (40, 50 and 60 oC) and Radiation Intensity (RI) (0.21, 0.31 and 0.41 w/cm2) on the response variables (drying time, Head Parboiled Rice Yield (HPRY), color value and hardness)) of parboiled rice were investigated. The drying was performed using hybrid hot air–infrared drying. The optimization of drying variables and the relationship b...
متن کاملEffect of process parameters on tensile strength of welds and modeling of laser welding of PA6/NBR/clay nanocomposite by response surface methodology
Polyamide 6 / nitrile butadiene rubber / nanoclay (PA6/NBR/clay) nanocomposite has gathered wide acceptance in industry. Laser welding, as a fabrication method, is applied to welding of polymer nanocomposites. In this study, the input parameters (clay (Closite 30B) content, laser power, scan velocity and stand-off-distance) are varied to achieve the best responses (tensile strength of welds). R...
متن کامل