Title: Thermal-nanoimprint lithography for perylenediimide-based distributed feedback laser fabrication
نویسندگان
چکیده
In the present work thermal nanoimprint lithography of various commercial thermoplastic resists as matrixes for perylenediimides (PDIs) has been studied. This fabrication method reduced the number of fabrication steps, and therefore, the cost of the obtained distributed feedback (DFB) lasers. The optical properties of these devices are analyzed, aiming to optimize their performance. Thermal-nanoimprint lithography for perylenediimide-based distributed feedback laser fabrication Aritz Retolaza , Aritz Juarros , Deitze Otaduy , Santos Merino , Víctor Navarro-Fuster , Manuel G. Ramirez , Pedro G. Boj , José A. Quintana , José M. Villalvilla c and María A. Díaz-García c CIC microGUNE, Goiru Kalea 9 Polo Innovación Garaia, 20500 Arrasate-Mondragón, Spain Micro and Nano Fabrication Unit, IK4-Tekniker, Eibar 20600, Spain Dpto. Física Aplicada, Instituto Universitario de Materiales de Alicante y Unidad Asociada UA-CSIC, Universidad de Alicante, 03080 Alicante, Spain. Dpto. Óptica, Instituto Universitario de Materiales de Alicante y Unidad Asociada UA-CSIC, Universidad de Alicante, 03080 Alicante, Spain. *Corresponding author e-mail:[email protected]
منابع مشابه
Fabrication of distributed feeback devices using X-ray lithography
Distributed feedback structures are essential for many applications in optics where wavelength-selectivity is required. This thesis focuses on the development of nanofabrication techniques for the fabrication of distributed feedback devices for optical communications. The distributed feedback laser and Bragg-grating-based optical filters single-pole, multiple-pole and integrated resonant channe...
متن کاملEfficient organic distributed feedback lasers with active films imprinted by thermal nanoimprint lithography
Organic solid-state lasers (OSLs) have been a subject of intense research for many years [1] mainly due to the various advantages of organic materials, such as easy processability, chemical versatility, wavelength tunability and low cost. Among the various types of resonators used in the field of OSLs, distributed feedback (DFB) structures are probably the most extensively studied. As compared ...
متن کاملApplication of Nanoimprint Lithography to Fabrication of Laser Diodes for Optical Communication Network
1-1 Market status of laser diodes for optical communication The recent growth of the Internet, mobile telecommunication, video on demand services, and other information-communication facilities has led to the explosion of worldwide communication traffic, leading to demand for faster and denser communication infrastructures including optical communication networks. Distributed feedback laser dio...
متن کاملNanoimprinted organic semiconductor laser pumped by a light-emitting diode.
An organic semiconductor laser, simply fabricated by UV-nanoimprint lithography (UV-NIL), that is pumped with a pulsed InGaN LED is demonstrated. Molecular weight optimization of the polymer gain medium on a nanoimprinted polymer distributed feedback resonator enables the lowest reported UV-NIL laser threshold density of 770 W cm(-2) , establishing the potential for scalable organic laser fabri...
متن کاملA nanoporous silicon nitride membrane using a two-step lift-off pattern transfer with thermal nanoimprint lithography
Nanoimprint lithography is emerging as a viable contender for fabrication of large-scale arrays of 5–500 nm features. A fabrication process for the realization of thin nanoporous membranes using thermal nanoimprint lithography is presented. Suspended silicon nitride membranes were fabricated by low-pressure chemical vapor deposition (LPCVD) in conjunction with a potassium hydroxide-based bulk m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014