Physically unclonable function using initial waveform of ring oscillators on 65 nm CMOS technology
نویسندگان
چکیده
A silicon physically unclonable function (PUF) using ring oscillators (ROs) has the advantage of easy application in both an application specific integrated circuit (ASIC) and a field-programmable gate array (FPGA). Here, we provide a RO-PUF using the initial waveform of the ROs based on 65 nm CMOS technology. Compared with the conventional RO-PUF, the number of ROs is greatly reduced and the time needed to generate an ID is within a couple of system clocks.
منابع مشابه
PUFs: Myth, Fact or Busted? A Security Evaluation of Physically Unclonable Functions (PUFs) Cast in Silicon
Physically Unclonable Functions (PUFs) are an emerging technology and have been proposed as central building blocks in a variety of cryptographic protocols and security architectures. However, the security features of PUFs are still under investigation: Evaluation results in the literature are difficult to compare due to varying test conditions, different analysis methods and the fact that repr...
متن کاملA New Solution to Analysis of CMOS Ring Oscillators
New equations are proposed for frequency and amplitude of a ring oscillator. The method is general enough to be used for all types of delay stages. Using exact largesignal circuit analysis, closed form equations for estimating the frequency and amplitude of a high frequency ring oscillator are derived as an example. The method takes into account the effect of various parasitic capacitors to...
متن کاملOn-chip phase noise measurement, design study in 65 nm CMOS technology
Jitter is generally defined as a time deviation of the clock waveform from its desired position. The deviation which occurs can be on the leading or lagging side and it can be bounded (deterministic) or unbounded (random). Jitter is a critical specification in the digital system design. There are various techniques to measure the jitter. The straightforward approach is based on spectrum analyze...
متن کاملArchitecture and Physical Implementation of Reconfigurable Multi-Port Physical Unclonable Functions in 65 nm CMOS
In modern cryptographic systems, physical unclonable functions (PUFs) are efficient mechanisms for many security applications, which extract intrinsic random physical variations to generate secret keys. The classical PUFs mainly exhibit static challenge-response behaviors and generate static keys, while many practical cryptographic systems need reconfigurable PUFs which allow dynamic keys deriv...
متن کاملNovel Oscillators in Subthreshold Regime
In this paper, the implementation of oscillators in the subthreshold region is proposed. The ring and coupled ring oscillators are implemented. The techniques of swapped body biasing (SBB) and Dynamic threshold Voltage MOSFET (DTMOS) biasing are introduced for performance improvement of coupled ring oscillators. The functionality of the oscillators in subthreshold region is verified through sim...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- CoRR
دوره abs/1703.00073 شماره
صفحات -
تاریخ انتشار 2016