Characterization of spark-generated N-waves in air using an optical schlieren method.

نویسندگان

  • Maria M Karzova
  • Petr V Yuldashev
  • Vera A Khokhlova
  • Sébastien Ollivier
  • Edouard Salze
  • Philippe Blanc-Benon
چکیده

Accurate measurement of high-amplitude, broadband shock pulses in air is an important part of laboratory-scale experiments in atmospheric acoustics. Although various methods have been developed, specific drawbacks still exist and need to be addressed. Here, a schlieren optical method was used to reconstruct the pressure signatures of nonlinear spherically diverging short acoustic pulses generated using an electric spark source (2.5 kPa, 33 μs at 10 cm from the source) in homogeneous air. A high-speed camera was used to capture light rays deflected by refractive index inhomogeneities, caused by the acoustic wave. Pressure waveforms were reconstructed from the light intensity patterns in the recorded images using an Abel-type inversion method. Absolute pressure levels were determined by analyzing at different propagation distances the duration of the compression phase of pulses, which changed due to nonlinear propagation effects. Numerical modeling base on the generalized Burgers equation was used to evaluate the smearing of the waveform caused by finite exposure time of the high-speed camera and corresponding limitations in resolution of the schlieren technique. The proposed method allows the study of the evolution of spark-generated shock waves in air starting from the very short distances from the spark, 30 mm, up to 600 mm.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Nonlinear propagation of spark-generated N-waves in air: modeling and measurements using acoustical and optical methods.

The propagation of nonlinear spherically diverging N-waves in homogeneous air is studied experimentally and theoretically. A spark source is used to generate high amplitude (1.4 kPa) short duration (40 μs) N-waves; acoustic measurements are performed using microphones (3 mm diameter, 150 kHz bandwidth). Numerical modeling with the generalized Burgers equation is used to reveal the relative effe...

متن کامل

Design and Application of a Photoacoustic Sensor for Monitoring the Laser Generated Stress Waves in Optical Fiber

Measurement of stress transients generated by a 400ns pulsed HF laser in an infrared fluoride glass fiber has been made using fast time – response piezoelectric film transducer. Acoustic signals up to 12 mV with frequencies ranging in megahertz generated by 21 mJ laser pulse when passed through the fiber axis in the linear region. It is shown that useful information such as onset of non - linea...

متن کامل

Speed Detection in Wind-Tunnels by processing Schlieren Images (RESEARCH NOTE)

Schlieren imaging in wind-tunnels is extensively utilized to study the effects of air on an airplane surface. One of the interesting subjects for research is to study the effects of speed change on the airplane surface. Speed change results in occurrence of shock waves, which are visualized as lines on Schlieren images. In this paper, we study the problem of detecting speed of a plane after occ...

متن کامل

Schlieren visualization of ultrasonic standing waves in mm-sized chambers for ultrasonic particle manipulation

BACKGROUND For the design and characterization of ultrasonic particle manipulation devices the pressure field in the fluid cavity is of great interest. The schlieren method provides an optical tool for the visualization of such pressure fields. Due to its purely optical nature this experimental method has got some unique advantages compared to methods like particle tracking. RESULTS A vertica...

متن کامل

BEM-FDM modeling of water free surface interaction with trapped air in OWC chamber for calculating generated power

Free surface modeling plays an important role in some ocean structures design, especially in Oscillating Water Column (OWC) devices. Boundary element method (BEM) is a suitable method for free surface modeling due to its simplicity, quick solving, and low data storage requirement. In this paper, BEM was used for free surface modeling in OWC chamber and out of it. Linear kinematic and dynamic bo...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • The Journal of the Acoustical Society of America

دوره 137 6  شماره 

صفحات  -

تاریخ انتشار 2015