Distributed trajectory generation for cooperative multi-arm robots via virtual force interactions
نویسندگان
چکیده
A trajectory generation method for multi-arm robots through cooperative and competitive interactions among multiple end-effecters is proposed. The method can generate the trajectories of the multiple arms in a distributed manner based on a concept of a virtual interaction force which represents an interaction between an end-effector and an environment. It is shown that the method is effective not only for simple cooperative tasks such as positioning a common object, but also for more complicated tasks including relative motions among arms.
منابع مشابه
The Effect of Base Position on Maximum Allowable Load of Dual Arm Robots
A new computational technique is presented to find the optimal base position of dual arm robots in order to carry maximum allowable load. The maximum allowable load on a desired trajectory is limited by the number of factors such as; actuators torque limits, kinematic constraints, and kinematic redundancy of cooperative manipulators. For a dual arm robot mounted on a rail or table, load works...
متن کاملA New Intelligent Approach to Patient-cooperative Control of Rehabilitation Robots
This paper presents a new intelligent method to control rehabilitation robots by mainly considering reactions of patient instead of doing a repetitive preprogrammed movement. It generates a general reference trajectory based on different reactions of patient during therapy. Three main reactions has been identified and included in reference trajectory: small variations, force shocks in a single ...
متن کاملOptimal Trajectory Generation for Energy Consumption Minimization and Moving Obstacle Avoidance of SURENA III Robot’s Arm
In this paper, trajectory generation for the 4 DOF arm of SURENA III humanoid robot with the purpose of optimizing energy and avoiding a moving obstacle is presented. For this purpose, first, kinematic equations for a seven DOF manipulator are derived. Then, using the Lagrange method, an explicit dynamics model for the arm is developed. In the next step, in order to generate the desired traject...
متن کاملAn Adaptive-Robust Control Approach for Trajectory Tracking of two 5 DOF Cooperating Robot Manipulators Moving a Rigid Payload
In this paper, a dual system consisting of two 5 DOF (RRRRR) robot manipulators is considered as a cooperative robotic system used to manipulate a rigid payload on a desired trajectory between two desired initial and end positions/orientations. The forward and inverse kinematic problems are first solved for the dual arm system. Then, dynamics of the system and the relations between forces/momen...
متن کاملParallel and distributed trajectory generation of redundant manipulators through cooperation and competition among subsystems
Autonomous distributed control (ADC) is one of the most attractive approaches for more versatile and autonomous robot systems. The paper proposes a parallel and distributed trajectory generation method for redundant manipulators through cooperative and competitive interactions among subsystems composing the ADC that is based on a concept of virtual arms. The virtual arm has the same kinematic s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- IEEE transactions on systems, man, and cybernetics. Part B, Cybernetics : a publication of the IEEE Systems, Man, and Cybernetics Society
دوره 27 5 شماره
صفحات -
تاریخ انتشار 1997