Network Working Group Encapsulation Methods for Transport of Ethernet over Mpls Networks Encapsulation of Ethernet over Mpls
نویسنده
چکیده
Status of This Memo This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited. Abstract An Ethernet pseudowire (PW) is used to carry Ethernet/802.3 Protocol Data Units (PDUs) over an MPLS network. This enables service providers to offer "emulated" Ethernet services over existing MPLS networks. This document specifies the encapsulation of Ethernet/802.3 PDUs within a pseudowire. It also specifies the procedures for using a PW to provide a "point-to-point Ethernet" service.
منابع مشابه
MPLS-TP - The New Technology for Packet Transport Networks
The Internet Engineering Task Force (IETF) and the Telecommunication Standardization Sector of the International Telecommunication Union (ITU-T) have undertaken a joint effort to standardize a new transport profile for the multi-protocol label switching (MPLS) technology that is intended to provide the basis for the next generation packet transport network. The fundamental idea of this activity...
متن کاملEncapsulation Methods for Transport of PPP/High-Level Data Link Control (HDLC) over MPLS Networks
A pseudowire (PW) can be used to carry Point to Point Protocol (PPP) or High-Level Data Link Control (HDLC) Protocol Data Units over a Multiprotocol Label Switching (MPLS) network without terminating the PPP/HDLC protocol. This enables service providers to offer "emulated" HDLC, or PPP link services over existing MPLS networks. This document specifies the encapsulation of PPP/HDLC Packet Data U...
متن کاملApplication of Ethernet Pseudowires to MPLS Transport Networks
Ethernet pseudowires are widely deployed to support packet transport of Ethernet services. These services in-turn provide transport for a variety of client networks, e.g., IP and MPLS. This document uses procedures defined in the existing IETF specifications of Ethernet pseudowires carried over MPLS networks. Many of the requirements for the services provided by the mechanisms explained in this...
متن کاملEncapsulation of MPLS over Layer 2 Tunneling Protocol Version 3
The Layer 2 Tunneling Protocol, Version 3 (L2TPv3) defines a protocol for tunneling a variety of payload types over IP networks. This document defines how to carry an MPLS label stack and its payload over the L2TPv3 data encapsulation. This enables an application that traditionally requires an MPLS-enabled core network, to utilize an L2TPv3 encapsulation over an IP network instead. Townsley, et...
متن کاملRFC 5994 Eth PWs to MPLS Transport
Ethernet pseudowires are widely deployed to support packet transport of Ethernet services. These services in-turn provide transport for a variety of client networks, e.g., IP and MPLS. This document uses procedures defined in the existing IETF specifications of Ethernet pseudowires carried over MPLS networks. Many of the requirements for the services provided by the mechanisms explained in this...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2006