Low Emittance Thermionic Electron Guns*
نویسنده
چکیده
منابع مشابه
High Average Current Electron Guns for High-Power FELs
High average power FELs require high average current electron injectors capable of generating high quality, short duration electron bunches with a repetition rate equal to the frequency of the rf linac. In this paper we propose, analyze and simulate an rf-gated, gridded thermionic electron gun for use in high average power FELs. Thermionic cathodes can provide the necessary high current, have l...
متن کاملUltracold and High Brightness Electron Source for next Generation Particle Accelerators
The ultracold plasma-based electron source has recently been proposed as an alternative to conventional photoinjectors or thermionic electron guns, which are widely used in today’s particle accelerators. The advantages of the ultracold plasma-based electron source lie in the fact that the electrons extracted from the cold plasma (from near threshold ionization of ultracold atoms) has very low t...
متن کاملA 90 Ghz Photoinjector
Photocathode rf guns depend on mode locked laser systems to produce an electron beam at a given phase of the rf. In general, the laser pulse is less than σz = 10° of rf phase in length and the required stability is on the order of ∆φ = 1°. At 90 GHz (W-band), these requirements correspond to σz = 333 fsec and ∆φ = 33 fsec. Laser system with pulse lengths in the fsec regime are commercially avai...
متن کاملThermionic Emission from Diamond Films in Molecular Hydrogen Environments
Diamond-based low-work function thermionic electron emitters are in high demand for applications ranging from electron guns and space thrusters to electrical energy converters. A key requirement of such diamond-based electron sources is hydrogen termination of the surfaces which can significantly reduce the emission barrier. However, at high temperatures (≤600°C), terminated hydrogen begins to ...
متن کاملA Highly Flexible Bunch Compressor for the Aps Leutl Fel
The Low-Energy Undulator Test Line (LEUTL) freeelectron laser (FEL) [1] at the Advanced Photon Source (APS) has achieved gain at 530 nm with an electron beam current of about 100 A [2, 3]. In order to push to 120 nm and beyond, we have designed and are commissioning a bunch compressor using a four-dipole chicane at 100-210 MeV to increase the current to 600 A or more. To provide options for con...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1989