Thermal stability of Fe/Mo layers
نویسندگان
چکیده
The thermal stability of an iron/molybdenum bilayer was determined using Rutherford backscattering spectrometry and X-ray diffraction. Substantial interdiffusion (3%) was observed upon annealing at 973 K for one hour. High temperature annealing of Fe/Mo layers in oxygen ambient is therefore not suitable for the formation of magnetite layers.
منابع مشابه
Photostability enhancement of Methyl orange by intercalation into hydrotalcite, and its dyeing on cotton
The aim of this study is the improvement of the photostability of anionic dye, methyl orange(MO), by intercalation into the hydrotalcite layer (Mg-F-MO LDH). It was found that the thermostability of MO was markedly improved by intercalation into the hydrotalcite host, whilst the photostability was enhanced slightly. The effect of the stability enhancement is larger when the amount of introduced...
متن کاملEffect of Fe3+–MMT on thermal degradation and mechanical behavior of PVP/Amylose nanocomposite films
Novel nanocomposite films based on amylose (AM) and Fe3+-montmorillonite (Fe3+–MMT) in the matrix of poly (vinyl pyrrolidone) (PVP) were fabricated by using a solution casting method. The X-Ray diffractional analysis indicated that an ion-exchange process occurred between Fe3+–MMT and PVP. Thermogravimetrical analysis (TGA), differential termogravivetrical analy...
متن کاملSynthesis of carbon nano structures on Fe/Cu/AI and Al/Steel by thermal chemical vapour deposition method
Using C2H2, 112 and As gases at 550'C, carbon nanotubes were fabricated on the surfaces of twosubstrates coated by nano thin layers of metal catalysts by DC magnetron sputtering. AYStamless steel andFe/CteAl, by thermal chemical vapor deposition (TCVD) The surface properties of the substrates wereparticularly investigated, and the effect of treatment of the substrates on the CNT's growth is cri...
متن کاملFirst-Principles Study on the Structural Stability and Segregation Behavior of -Fe/Cr2N Interface with Alloying Additives M (M = Mn, V, Ti, Mo, and Ni)
This study investigated the structural stability and electrochemical properties of alloying additives M (M = Mn, V, Ti, Mo, or Ni) at the γ-Fe(111)/Cr2N(0001) interface by the first-principles method. Results indicated that V and Ti were easily segregated at the γ-Fe(111)/Cr2N(0001) interface and enhanced interfacial adhesive strength. By contrast, Ni and Mo were difficult to segregate at the γ...
متن کاملHighly spin-polarized field emissions induced by quantum size effects in ultrathin films of Fe on W(001).
Spin-polarized field emissions from Fe pseudomorphic ultrathin films on W(001) surfaces are studied by density functional calculations. We found that nearly completely spin-polarized field emission currents can be realized in two and four Fe layers on W(001) and that these systems have the additional advantages of thermal stability and low work functions. The unusually high spin polarizations o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2005