Solid drops: large capillary deformations of immersed elastic rods.

نویسندگان

  • Serge Mora
  • Corrado Maurini
  • Ty Phou
  • Jean-Marc Fromental
  • Basile Audoly
  • Yves Pomeau
چکیده

Under the effect of surface tension, a blob of liquid adopts a spherical shape when immersed in another fluid. We demonstrate experimentally that soft, centimeter-size elastic solids can exhibit a similar behavior: when immersed into a liquid, a gel having a low elastic modulus undergoes large, reversible deformations. We analyze three fundamental types of deformations of a slender elastic solid driven by surface stress, depending on the shape of its cross section: a circular elastic cylinder shortens in the longitudinal direction and stretches transversally; the sharp edges of a square based prism get rounded off as its cross sections tend to become circular; and a slender, triangular based prism bends. These experimental results are compared to analysis and nonlinear simulations of neo-Hookean solids deformed by surface tension and are found to be in good agreement with each other.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Piercing a liquid surface with an elastic rod: Buckling under capillary forces

When a thin elastic structure comes in contact with a liquid interface, capillary forces can be large enough to induce elastic deformations. This effect becomes particularly relevant at small scales where capillary forces are predominant, for example in microsystems (micro-electro-mechanical systems or microfluidic devices) under humid environments. In order to explore the interaction between c...

متن کامل

Capillary deformations of bendable films.

We address the partial wetting of liquid drops on ultrathin solid sheets resting on a deformable foundation. Considering the membrane limit of sheets that can relax compression through wrinkling at negligible energetic cost, we revisit the classical theory for the contact of liquid drops on solids. Our calculations and experiments show that the liquid-solid-vapor contact angle is modified from ...

متن کامل

A fixed-mesh method for incompressible flow-structure systems with finite solid deformations

A fixed-mesh algorithm is proposed for simulating flow–structure interactions such as those occurring in biological systems, in which both the fluid and solid are incompressible and the solid deformations are large. Several of the well-known difficulties in simulating such flow–structure interactions are avoided by formulating a single set of equations of motion on a fixed Eulerian mesh. The so...

متن کامل

On End Rotation for Open Rods Undergoing Large Deformations

We give a careful discussion of end rotation in elastic rods, focusing on ambiguities that arise if arbitrarily large deformations are allowed. By introducing a closure and restricting to a class of deformations we show that a rigorous treatment of end rotation can be obtained. The results underpin various non-rigorous discussions in the literature and serve to promote the variational analysis ...

متن کامل

Droplets move over viscoelastic substrates by surfing a ridge

Liquid drops on soft solids generate strong deformations below the contact line, resulting from a balance of capillary and elastic forces. The movement of these drops may cause strong, potentially singular dissipation in the soft solid. Here we show that a drop on a soft substrate moves by surfing a ridge: the initially flat solid surface is deformed into a sharp ridge whose orientation angle d...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Physical review letters

دوره 111 11  شماره 

صفحات  -

تاریخ انتشار 2013