Roberto Calabrò - Supervisor : Marta Rink MEChANICAL ChARACTERIzATION Of ELASTOMERS uNDER quASI - STATIC AND DyNAMIC BIAxIAL LOADING CONDITIONS
نویسنده
چکیده
The courses of the Doctoral Program provide Ph.D students in Materials Engineering with a common, basic knowledge on Materials Science and Technology, followed by a specialized training in specific fields. The objective is to combine the theoretical knowledge with the skills required by technology in order to form qualified researchers who can manage the design, manufacturing and use of traditional and/or new materials.
منابع مشابه
Dynamic and Quasi-Static Tensile Properties of Structural S400 Steel
The study of mechanical behavior of the structural steel S400 under quasi- static and dynamic loading has been the subject of this investigation. In oder to obtain different stress - triaxiality conditions the specimens were notched with 1, 1.5, 2 and 3.5 mm notch radius. The results of fractography show as the velocity of tension increases, ductility reduces and a ductile-brittle transition oc...
متن کاملOn the effect of grain size on rock behavior under cyclic loading by distinct element method
It is well-known that the mechanical behavior of rocks under cyclic loading is much different from static loading conditions. In most constructions, the load applied to structures is within dynamic ranges. That’s why a great deal of attention has been paid towards this field in order to identify the dynamic behavior of rocks in more details. Nevertheless, the nature of dynamic failure in rocks ...
متن کاملEffects of age and loading rate on equine cortical bone failure.
Although clinical bone fractures occur predominantly under impact loading (as occurs during sporting accidents, falls, high-speed impacts or other catastrophic events), experimentally validated studies on the dynamic fracture behavior of bone, at the loading rates associated with such events, remain limited. In this study, a series of tests were performed on femoral specimens obtained post-mort...
متن کاملDetermination of Residual Stress for Single and Double Autofrettage of Thick-walled FG Cylinders Subjected to Dynamic Loading
In the present article a numerical procedure is developed for dynamic analysis of single and double autofrettage of thick–walled FG cylinders under transient loading. The governing differential equations are discretized and presented in explicit Lagrangian formalism. The explicit transient solution of discrete equations are obtained on the meshed region and results for stress and strain distrib...
متن کاملMeasurement of contact stresses using real-time shearing interferometry
Liming Xu Hareesh V. Tippur Carl-Ernst Rousseau Auburn University Department of Mechanical Engineering Auburn, Alabama 36849 Abstract. The optical method coherent gradient sensing, a real-time lateral shearing interferometry, is proposed for measuring contact stress fields under static and dynamic loading conditions. Feasibility of the method is first established under quasi-static conditions. ...
متن کامل