Simple two-step fabrication method of Bi2Te3 nanowires
نویسندگان
چکیده
Bismuth telluride (Bi2Te3) is an attractive material for both thermoelectric and topological insulator applications. Its performance is expected to be greatly improved when the material takes nanowire structures. However, it is very difficult to grow high-quality Bi2Te3 nanowires. In this study, a simple and reliable method for the growth of Bi2Te3 nanowires is reported, which uses post-sputtering and annealing in combination with the conventional method involving on-film formation of nanowires. Transmission electron microscopy study shows that Bi2Te3 nanowires grown by our technique are highly single-crystalline and oriented along [110] direction.
منابع مشابه
Electrochemical fabrication of textured Bi2Te3 nanowire arrays
Initiated by the theoretical works of Hicks and Dresselhaus [1], the interest in nanostructured materials as more efficient thermoelectric materials has increased enormously. Recent experimental results on structures ranging from superlattices [2] to Si nanowires [3,4] emphasize the potential of tailoring materials properties by implementing finiteand quantum-size effects to circumvent classica...
متن کاملOptical Properties of ZnO Nanowires and Nanorods Synthesized by Two Step Oxidation Process
ZnO nanowires with a diameter of 70 nm and nanorods with a diameter in the range of 100-150 nm and two micrometer in length were grown on glass substrates by resistive evaporation method and applying a two step oxidation process at low temperatures, without using any catalyst, template or buffer layer. XRD pattern of these nanostructures indicated a good crystallinity property with wurtzite hex...
متن کاملThermal and Electrical Conduction of Single-crystal Bi2Te3 Nanostructures grown using a one step process.
Single-crystal Bi2Te3 nanowires (NWs) and nanoribbons (NRs) were synthesized by a vapor-liquid-solid (VLS) method from Bi2Te3 powder. To investigate the thermal properties of the Bi2Te3 nanostructure, a nondestructive technique based on temperature dependent Raman mapping was carried out. The Raman peaks were red shifted with increasing temperature. In addition, the fraction of the laser power ...
متن کاملTowards a nanostructured thermoelectric generator using ion-track lithography
This paper presents the process development towards a new generation of nanostructured thermoelectric generators for power harvesting from small temperature gradients by using a combination of traditional silicon microfabrication techniques, electroplating and submicron ion-track nanolithography. Polyimide nanotemplates with pore diameters ranging from 30 nm to 120 nm were fabricated. Prelimina...
متن کاملElectrochemical fabrication of Cu/Pd multilayer nanowires in polycarbonate template
In this work,copper/palladium (Cu/Pd) multilayer nanowires were successfully prepared by electrodeposition method using polycarbonate template. The fabrication of Pd/Cu multilayer nanowires was controlled by analyzing the current–time transient during electrodeposition using potentiostat. The morphological properties of the nanowires were studied by scanning electron microscopy (SEM) and resu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 6 شماره
صفحات -
تاریخ انتشار 2011