Self-supporting nanowire arrays templated in sacrificial branched porous anodic alumina for thermoelectric devices
نویسندگان
چکیده
منابع مشابه
Optical properties of Ni and Cu nanowire arrays and Ni/Cu superlattice nanowire arrays
: In this study, Ni and Cu nanowire arrays and Ni/Cu superlattice nanowire arrays are fabricated using standard techniques such as electrochemical deposition of metals into porous anodic alumina oxide templates having pore diameters of about 50 nm. We perform optical measurements on these nanowire array structures. Optical reflectance (OR) of the as-prepared samples is recorded using an imaging...
متن کاملPatterned metal nanowire arrays from photolithographically-modified templates.
An effective procedure for the fabrication of patterned nanowire arrays with micron-sized features is presented. Photolithographic methods are utilized to form set patterns onto porous anodic alumina membranes (AAM), and these modified membranes can then be used in the electrochemical growth of nanowire arrays. This approach readily allows the formation of a variety of nanowire array patterns w...
متن کاملNanomechanical humidity detection through porous alumina cantilevers
We present here the behavior of the resonance frequency of porous anodic alumina cantilever arrays during water vapor adsorption and emphasize their possible use in the micromechanical sensing of humidity levels at least in the range of 10-22%. The sensitivity of porous anodic aluminium oxide cantilevers (Δf/Δm) and the humidity sensitivity equal about 56 Hz/pg and about 100 Hz/%, respectively....
متن کاملFabrication of nanomaterials using porous alumina templates
Nanofabrication by self-organization methods has attracted much attention owing to the fact that it enables mass production without the use of expensive lithographical tools, such as an electron beam exposure system. Porous alumina can be fabricated electrochemically through anodic oxidation of aluminum by means of such a self-organization method, yielding highly ordered arrays of nanoholes sev...
متن کاملPorous anodic alumina on galvanically grown PtSi layer for application in template-assisted Si nanowire growth
We report on the fabrication and morphology/structural characterization of a porous anodic alumina (PAA)/PtSi nano-template for use as matrix in template-assisted Si nanowire growth on a Si substrate. The PtSi layer was formed by electroless deposition from an aqueous solution containing the metal salt and HF, while the PAA membrane by anodizing an Al film deposited on the PtSi layer. The morph...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014