ویراساینس.
سند علمی

AN2253, Channel Estimation for a WCDMA Rake Receiver

Ahsan

چکیده

The third-generation universal mobile telecommunications system (UMTS) uses direct-sequence code division multiple access (DS-CDMA) to transmit data. DS-CDMA is well suited to transmit data over the multipath fading channel. The high signal bandwidth for the WCDMA system (5 MHz) allows the received signal to be split into distinct multipaths with high resolution. For the first generation of UMTS handsets, a rake receiver is the receiver of choice because it allocates one rake finger to each multipath, thus maximizing the amount of received signal energy. The rake receiver combines these different paths into a composite signal with substantially better characteristics for demodulation than a single path. To combine the different paths meaningfully, the rake receiver needs such channel parameters as the number of paths, their location (in the delay domain), and their (complex-valued) attenuation. In a WCDMA system, the necessary channel parameters must be estimated and tracked throughout the transmission.

اسناد مشابه

  • On channel estimation for RAKE receiver in a mobile multipath fading channel

    سند علمی۱۹۹۴ICASSPFu Li, Heng Xiao, Jin Yang

    model, a RAKE receiver can be used to detect the signal from the multipath fading channel. the tap weights were assumed known when deriving RAKE receiver, but in practice a correlator is used to estimate the tap weights. Multipath fading is one of the major practical concernS in

  • AN2253, Channel Estimation for a WCDMA Rake Receiver

    سند علمی۲۰۰۴Ahsan Aziz

    The third-generation universal mobile telecommunications system (UMTS) uses direct-sequence code division multiple access (DS-CDMA) to transmit data. DS-CDMA is well suited to transmit data over the multipath fading channel. The high signal bandwidth for the WCDMA system (5 MHz)

  • An FPGA implementation of WCDMA-RAKE receiver architecture

    سند علمی۲۰۱۱Rakesh Kr. Jha, Mamta Sood

    An FPGA implementation of WCDMA-RAKE receiver architecture 1 2 Rakesh Kr. Jha, Mamta Sood Dept. BIST Bhopal, (M.P.) India EC Dept., TIT College, Bhopal, (M.P.) India This paper deals with the WCDMA Rake-receiver architecture for 3G communications. Third generation mobile communic

  • “An Implementation of WCDMA Rake Receiver on FPGA using VHDL Used In 3G Wireless Communications”

    سند علمی۲۰۱۲Kapil Sahu, Harish Prajapati

    3G mobile communications is advanced and emerging technology in the field of wireless communication also providing facilities like multimedia accessing, internet services, higher capacity of data rates and multiple services for same connection. The Rake receiver involves descramb

  • AN2251, Maximum Ratio Combining for a WCDMA Rake Receiver

    سند علمی۲۰۰۴

    Wideband CDMA (WCDMA), a widely accepted thirdgeneration interface, is based on direct-sequence (DS) CDMA technology. To minimize distortion of the signals in a DSCDMA system, a rake receiver is used. A signal transmitted through the wireless channel may be severely distorted due

  • Fading Cancellation in WCDMA Rake Receiver

    سند علمی۲۰۱۱Monika Rawat, Vani

    The main principle of RAKE receiver is that they exploit multipath propagation by receiving the multipath components of the transmitted signal separately and combining their energies. The complete design, for this purpose, can be segmented into distinct stages or blocks based on