Signaling capacity of FR4 PCB traces for chip-to-chip communication
نویسندگان
چکیده
The signaling capacity of traces on the popular PCB dielectric.material FR4 is under-utilized today by at least one order of magnitude through the choice of pre-coding, pulseshaping, equalization, and receiver architecture. This paper determines the channel capacity of FX4 traces of various length in the presence of noise and crosstalk, and explores capacity limits based on signaling schemes such as 4-level PAM.
منابع مشابه
Cost-aware Topology Customization of Mesh-based Networks-on-Chip
Nowadays, the growing demand for supporting multiple applications causes to use multiple IPs onto the chip. In fact, finding truly scalable communication architecture will be a critical concern. To this end, the Networks-on-Chip (NoC) paradigm has emerged as a promising solution to on-chip communication challenges within the silicon-based electronics. Many of today’s NoC architectures are based...
متن کاملApplication Mapping onto Network-on-Chip using Bypass Channel
Increasing the number of cores integrated on a chip and the problems of system on chips caused to emerge networks on chips. NoCs have features such as scalability and high performance. NoCs architecture provides communication infrastructure and in this way, the blocks were produced that their communication with each other made NoC. Due to increasing number of cores, the placement of the cores i...
متن کاملA Low-Overhead and Low-Power RF Transceiver for Short-Distance On- and Off-Chip Interconnects
One of the most difficult problems that remains to be solved in wire interconnect architectures is the achievement of lower latency and higher concurrency on a shared bus or link without increasing the power and circuit overhead. Novel improvements in short distance onand off-chip interconnects can be provided by using a multi-band RF interconnect (RF-I) system. Unlike the conventional currento...
متن کامل-chip Ic Decoupl Ing Measures
Over the years, many papers and articles have been written about optimizing off -chip IC decoupling. Many IC vendor application recommendations feature a cluster of decoupling capacitors adjacent to the IC, in close proximity to one another—viz. an electrolytic capacitor along with a small and a large value ceramic capacitor at the various supply nodes. Th e basic conviction underlying this app...
متن کاملCAFT: Cost-aware and Fault-tolerant routing algorithm in 2D mesh Network-on-Chip
By increasing, the complexity of chips and the need to integrating more components into a chip has made network –on- chip known as an important infrastructure for network communications on the system, and is a good alternative to traditional ways and using the bus. By increasing the density of chips, the possibility of failure in the chip network increases and providing correction and fault tol...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2003