High-efficiency ultrasmall polarization converter in InP membrane.
نویسندگان
چکیده
An ultrasmall (<10 μm length) polarization converter in InP membrane is fabricated and characterized. The device relies on the beating between the two eigenmodes of chemically etched triangular waveguides. Measurements show a very high polarization conversion efficiency of >99% with insertion losses of <-1.2 dB at a wavelength of 1.53 μm. Furthermore, our design is found to be broadband and tolerant to dimension variations.
منابع مشابه
Design of Photonic Crystal Polarization Splitter on InP Substrate
In this article, we suggested a novel design of polarization splitter based on coupler waveguide on InP substrate at 1.55mm wavelength. Photonic crystal structure is consisted of two dimensional (2D) air holes embedded in InP/InGaAsP material with an effective refractive index of 3.2634 which is arranged in a hexagonal lattice. The photonic band gap (PBG) of this structure is determined using t...
متن کاملA compact integrated polarization splitter/converter in InGaAsP/InP
A novel design for an integrated passive polarization splitter/converter combination is presented. The device consists of a Mach–Zehnder interferometer with polarization converters in both arms. The device is analyzed using the transfer matrix method and fabricated in InGaAsP–InP. Measurement results show a splitting ratio of approximately 10 dB and a conversion of>90%. This device can be monol...
متن کاملPhotonic Crystal-Based Polarization Converter for Optical Communication Applications
A photonic crystal-based TE to TM polarization converter for integrated optical communication is proposed in this paper. The photonic crystal consists of air circular-holes in slab waveguide. The radius of holes are determined to be 291nm having lattice constant of 640nm using the gap map and band diagram. The polarization converter is composed of an InGaAsP triangular-shaped waveguide on SiO2 ...
متن کاملMode-evolution-based polarization rotator-splitter design via simple fabrication process.
A mode-evolution-based polarization rotator-splitter built on InP substrate is proposed by combining a mode converter and an adiabatic asymmetric Y-coupler. The mode converter, consisting of a bi-level taper and a width taper, effectively converts the fundamental TM mode into the second order TE mode without changing the polarization of the fundamental TE mode. The following adiabatic asymmetri...
متن کاملBroadband wide-angle polarization converter for LCD backlight.
A novel polarization converter using reflective metallic gratings and a polarization beam splitter is introduced for LCD backlight illumination. These two optical elements form a polarization rotation resonator. Broadband and high optical efficiency of polarization conversion in the visible region is achieved through the resonance of the refracted light and the surface plasmon wave in metallic ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Optics letters
دوره 37 17 شماره
صفحات -
تاریخ انتشار 2012