Rational fabrication of a gold-coated AFM TERS tip by pulsed electrodeposition.
نویسندگان
چکیده
Reproducible fabrication of sharp gold- or silver-coated tips has become the bottleneck issue in tip-enhanced Raman spectroscopy, especially for atomic force microscopy (AFM)-based TERS. Herein, we developed a novel method based on pulsed electrodeposition to coat a thin gold layer over atomic force microscopy (AFM) tips to produce plasmonic TERS tips with high reproducibility. We systematically investigated the influence of the deposition potential and step time on the surface roughness and sharpness. This method allows the rational control of the radii of gold-coated TERS tips from a few to hundreds of nanometers, which allows us to systematically study the dependence of the TERS enhancement on the radius of the gold-coated AFM tip. The maximum TERS enhancement was achieved for the tip radius in the range of 60-75 nm in the gap mode. The coated gold layer has a strong adhesion with the silicon tip surface, which is highly stable in water, showing the great potential for application in the aqueous environment.
منابع مشابه
Tip-enhanced Raman spectroscopy of graphene-like and graphitic platelets on ultraflat gold nanoplates.
In this study, tip-enhanced Raman spectroscopy (TERS) is used to characterize graphene-like and graphitic platelets composed of a few layers of graphene. Specifically, gap-mode TERS geometry provides a larger enhancement of the local electromagnetic field at the junction formed by a gold sharp tip and a gold substrate. Graphene-like platelets are deposited onto ultra-flat thin gold nanoplates u...
متن کاملTip-enhanced Raman mapping with top-illumination AFM.
Tip-enhanced Raman mapping is a powerful, emerging technique that offers rich chemical information and high spatial resolution. Currently, most of the successes in tip-enhanced Raman scattering (TERS) measurements are based on the inverted configuration where tips and laser are approaching the sample from opposite sides. This results in the limitation of measurement for transparent samples only...
متن کاملElectrodeposition of Gold to Conformally Fill High Aspect Ratio Nanometric Silicon Grating Trenches: A Comparison of Pulsed and Direct Current Protocols
Filling high-aspect-ratio trenches with gold is a frequent requirement in the fabrication of x-ray optics as well as micro-electronic components and other fabrication processes. Conformal electrodeposition of gold in sub-micron-width silicon trenches with an aspect ratio greater than 35 over a grating area of several square centimeters is challenging and has not been described in the literature...
متن کاملMultilayered nano-prism vertex tips for tip-enhanced Raman spectroscopy and imaging.
We presented a scalable fabrication method for the preparation of multilayered nano-prism vertex (NV)-tips whose dimensions can be controlled for tip-enhanced Raman spectroscopy (TERS). The NV-tip had sharp vertices (diameter ~20 nm) originated from the chemical lift-off process after the angle-grinding process, enabling high resolution imaging. TERS measurements were performed on brilliant cre...
متن کاملComparative study of atomic force mode and tunneling mode tip-enhanced Raman spectroscopy
In Tip-Enhanced Raman Spectroscopy (TERS) a metal (or metallized) sharp tip is used to enhance the electromagnetic field by a localized surface-plasmon excitation. Two different modes – atomic force mode (AFM) and scanning tunneling mode (STM) – together with their respective types of probe tips are used in TERS experiments. We have compared the efficiency in enhancing the Raman signal on a thi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Nanoscale
دوره 7 43 شماره
صفحات -
تاریخ انتشار 2015