Stabilizing electrochemical carbon capture membrane with Al2O3 thin-film overcoating synthesized by chemical vapor deposition.
نویسندگان
چکیده
Development of high-efficiency and cost-effective carbon capture technology is a central element of our effort to battle the global warming and climate change. Here we report that the unique high-flux and high-selectivity of electrochemical silver-carbonate dual-phase membranes can be retained for an extended period of operation by overcoating the surfaces of porous silver matrix with a uniform layer of Al2O3 thin-film derived from chemical vapor deposition.
منابع مشابه
Optimized Conditions for Catalytic Chemical Vapor Deposition of Vertically Aligned Carbon Nanotubes
Here, we have synthesized vertically aligned carbon nanotubes (VA-CNTs), using chemical vapor deposition (CVD) method. Cobalt and ethanol are used as the catalyst and the carbon source, respectively. The effects of ethanol flow rate, thickness of Co catalyst film, and growth time on the properties of the carbon nanotube growth are investigated. The results show that the flow rate of ethanol and...
متن کاملBias stress stability of zinc-tin-oxide thin-film transistors with Al2O3 gate dielectrics
The bias stability of zinc-tin-oxide ZTO thin-film transistors TFTs with either Al2O3 gate dielectrics deposited via atomic layer deposition ALD or SiO2 gate dielectrics deposited via plasma-enhanced chemical vapor deposition PECVD was compared. Both device types showed incremental mobility 11 cm2 /V s, subthreshold slopes 0.4 V /dec, and ION / IOFF ratios of 107. During repeated ID-VGS sweepin...
متن کاملProcessing and Characterization of Coating and Thin Film Materials
Coatings and thin film materials are employed in many different industrial fields for decades, mainly for protective purposes. This large experience provokes that, currently, a wide variety of technologies for both preparation and characterization are available. Particularly, focusing on energy and environmental applications, three main film types can be distinguished: (1) materials with cataly...
متن کاملTransfer printing approach to all-carbon nanoelectronics
Transfer printing methods are used to pattern and assemble monolithic carbon nanotube (CNT) thin-film transistors on large-area transparent, flexible substrates. Airbrushed CNT thin-films with sheet resistance 1 kX sq 1 at 80% transparency were used as electrodes, and high quality chemical vapor deposition (CVD)-grown CNT networks were used as the semiconductor component. Transfer printing was ...
متن کاملCarbon Nanotubes Synthesis by Chemical Vapor Deposition of Methane over Zn – Fe Mixed Catalysts Supported on Alumina
Carbon nanotubes were synthesized over a series of Zn-containing Fe/alumina catalysts by chemical vapor deposition method at two reaction temperatures of 850 and 950 °C using methane as a carbon source. Catalysts were synthesized by keeping Fe concentration constant and varying Zn concentration to study the effects of Zn. The catalysts were characterized using X – ray powder diffraction and N2 ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Chemical communications
دوره 51 14 شماره
صفحات -
تاریخ انتشار 2015