A user interface for the representation of the dynamic results on the pantograph-catenary interactions
نویسندگان
چکیده
In this paper a user-friendly environment for the representation of the dynamic results on the pantograph-catenary interactions is presented. This environment consists of an interactive interface for the representation of graphics and another for the representation of video. By means of the first interface for the representation of graphics, the user can interact with the different graphic representations obtained starting from the data generated by the dynamic calculation of catenaries. The objective of the second interface is to generate a video containing the simulation of the interaction between the pantograph and the catenary. The video sequence, generated by the user through its interactions, can be recorded in AVI format. These two interfaces have been integrated in a user-friendly, interactive and graphically oriented tool software called CALPE. This tool is used for the static and dynamic analysis of a catenaries system, which is shown by menas of a real case study.
منابع مشابه
Catenary emulation for hardware-in-the-loop pantograph testing with a model predictive energy-conserving control algorithm
Pantograph current collectors, especially for high-speed trains, need to ensure safe contact with the catenary under stringent requirements on the dynamic contact force. A novel, high-dynamic pantograph test rig with accurate virtual catenary emulation is presented that allows for efficient, realistic, and reproducible testing. The complex dynamics of the pantograph/catenary interaction is mode...
متن کاملA Three-Dimensional Calculation for Dynamic Pantograph-Catenary Interaction
Dynamic pantograph-catenary interaction is one of the most critical aspects to consider in catenary design, especially in high-speed rails. It is essential to maintain a constant power transmission in order to achieve high speeds and avoid the production of electric arcs, which damage the wires. This paper shows a tool, called InDiCa 3D, based on a three-dimensional model to solve the dynamic p...
متن کاملHigh-speed railway pantograph and catenary dynamic simulation system modelling and verification
The dynamic simulation system of a pantograph and a catenary has been built by using the finite element method, in which the pantograph is equivalent to a threemass-damper-stiffness system and the catenary contains only cable and beam elements. Considering droppers as nonlinear elements only stressed by tension, a sliding contact model of the pantograph and catenary is coupled by penalty functi...
متن کاملPantograph-catenary Dynamic Interaction for a Overhead Line Supported by Noise Barrier
Subject of the paper is a particular configuration of overhead line, in which noise barrier structure is used as supports of the catenary instead of standard poles. This configuration is foreseen in case the noise barrier position is in conflict with the poles location. If the catenary is supported by the noise barrier, the motion that the latter undergo due to wave pressure associated to train...
متن کاملPantograph-Catenary System Modeling Using MATLAB-Simulink Algorithms
Contacts between pantograph and catenary are the most critical parts in the transmission of electrical energy for modern high-speed trains. Contact wire oscillations change combined force between pantograph and catenary, and the contact may even get lost. Therefore special pantographs and catenaries have been developed and further constructive changes are under development. A design criterion i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2006