Study on Optimization for Four Bar-Partially Compliant Mechanism

نویسنده

  • Shyh-Chour Huang
چکیده

This paper concentrates on the application of fuzzy logic based on Taguchi method (FLTM) for multiobjective optimization of the small-length flexural pivot (belongs to link 4) in partially four bar-compliant mechanisms. The input parameters such as the input torque and the crank angle of link 2 were optimized with considerations of the multiple performance measures as angular displacement and stress of the small-length flexural pivot. Angular displacement and stress of the small-length flexural pivot are two objective functions were formulated using pseudo-rigid-body model (PRBM) and principle of virtual work. The results found that the input torque at level 1 of 3 Nm and crank angular at level 1 of 100 degrees are favorable parameters for compliant flapper mechanism. Based on ANOVA, the results showed that input torque is the most significant with respond highest value of F test of 4.1752.

برای دسترسی به متن کامل این مقاله و 10 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Pareto Optimal Balancing of Four-bar Mechanisms Using Multi-Objective Differential Evolution Algorithm

Four-bar mechanisms are widely used in the industry especially in rotary engines. These mechanisms are usually applied for attaining a special motion duty like path generation; their high speeds in the industry cause an unbalancing problem. Hence, dynamic balancing is essential for their greater efficiency. In this research study, a multi-objective differential evolution algorithm is used for P...

متن کامل

Linkage factors optimization of Multi-outputs of compliant mechanism using Response Surface

This paper presents a linkage factors synthesis and multi-level optimization technique for bi-stable compliant mechanism. The linkage synthesis problem is modeled as multiple level factors and responses optimization problem with constraints. The bi-stable compliant mechanism is modeled as a crank slider mechanism using pseudo-rigid-body model (PRBM). The model exerts the large deflection of fle...

متن کامل

Enumeration of Optimal Pin-Jointed Bistable Compliant Mechanisms

Recently, a new type of mechanism called compliant mechanism has been developed and applied mainly in the field of micro-mechanics. A compliant mechanism has flexible parts to stabilize the structure, which is contrary to the conventional unstable mechanism. Although a compliant mechanism is usually modeled as a continuum with elastic joints, it is possible to generate the similar mechanism by ...

متن کامل

Stiffness Modeling and Analysis of Passive Four- Bar Parallelogram in Fully Compliant Parallel Positioning Stage

In order to investigate the influence of the stiffness of the compliant prismatic pair, a planar four-bar parallelogram, in a fully compliant parallel mechanism, the stiffness model of the passive compliant prismatic pair in a compliant parallel positioning stage is established using the compliant matrix method and matrix transformation. The influences of the constraints and the compliance of t...

متن کامل

Stiffness Modeling and Analysis of Passive Four- Bar Parallelogram in Fully Compliant Parallel Positioning Stage

In order to investigate the influence of the stiffness of the compliant prismatic pair, a planar four-bar parallelogram, in a fully compliant parallel mechanism, the stiffness model of the passive compliant prismatic pair in a compliant parallel positioning stage is established using the compliant matrix method and matrix transformation. The influences of the constraints and the compliance of t...

متن کامل

افزودن به منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی راحت تر خواهید کرد

برای دسترسی به متن کامل این مقاله و 10 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014