Polypyrrole self-organized nanopore arrays formed by controlled electropolymerization in TiO2 nanotube template.

نویسندگان

  • Damian Kowalski
  • Patrik Schmuki
چکیده

A new concept for formation of nanostructured intrinsically conducting polymers (ICP) is demonstrated. Polypyrrole can be electropolymerized from an ionic-surfactant-solution in TiO(2) nanotube framework to form a geometrical structure of self-organized nanopore arrays. Polymerization is initialized selectively in the space between nanotube walls forming a mechanically stable polymer network with controlled wall thickness from 40 to 10 nm. Such robust polymer nanostructures are very promising for application in electrochemical systems of limited charge carrier diffusion length.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Fabrication of Polypyrrole Nanowire and Nanotube Arrays

Large area highly uniform and ordered polypyrrole nanowire and nanotube arrays were fabricated by chemical oxidation polymerization with the help of a porous anodic aluminium oxide (AAO) template. Under 0.2 moL/L pyrrole (H2O) and 0.2 moL/L FeCl3 (H2O) pattern, polypyrrole nanowire arrays were obtained after 2.0 hours polymerization reaction in a two-compartment reaction cell. When the reaction...

متن کامل

Fabrication and optical properties of gold nanotube arrays

Arrays of gold nanotubes with polypyrrole cores were grown on glass substrates by electrodeposition into thin film porous alumina templates. Measurements of optical transmission revealed strong extinction peaks related to plasmonic resonances, which were sensitive to the polarization state and angle of incidence. On prolonging the electrodeposition of gold, the polypyrrole core became fully enc...

متن کامل

Vertically aligned ZnO nanorod core-polypyrrole conducting polymer sheath and nanotube arrays for electrochemical supercapacitor energy storage

Nanocomposite electrodes having three-dimensional (3-D) nanoscale architecture comprising of vertically aligned ZnO nanorod array core-polypyrrole (PPy) conducting polymer sheath and the vertical PPy nanotube arrays have been investigated for supercapacitor energy storage. The electrodes in the ZnO nanorod core-PPy sheath structure are formed by preferential nucleation and deposition of PPy lay...

متن کامل

Freestanding TiO2 Nanotube Arrays with Ultrahigh Aspect Ratio via Electrochemical Anodization

Self-organized, freestanding titania (TiO2) membrane with ultrahigh aspect ratio of the length/diameter (∼1500) was fabricated via electrochemical anodization of highly pure titanium (Ti) foil in fluorinecontaining ethylene glycol, followed by a simple and safe detachment of the formed TiO2 membrane from the metallic Ti substrate. The resulting membrane consists of highly ordered, vertically al...

متن کامل

Novel three-dimensional nanoporous alumina as a template for hierarchical TiO2 nanotube arrays.

Hierarchical micro-/nano-structures made easy. By using extremely rough, chemically etched microstructured aluminium foils, anodization in phosphoric acid under very harsh conditions, e.g., 10 wt% phosphoric acid and room temperature, can be repeatedly accomplished without suffering from breakdown. As a result, an alumina membrane with a three-dimensionally distributed nanopore structure is for...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Chemical communications

دوره 46 45  شماره 

صفحات  -

تاریخ انتشار 2010