[Temperature modifications in shantytown environments and thermal discomfort].
نویسندگان
چکیده
OBJECTIVE To study aspects of the microclimate in a shantytown (favela), in order to understand the influence of the land occupation pattern on its climatic parameters. METHODS The study was carried out in a shantytown located in the southwestern region of the city of São Paulo, Brazil, between February 19 and July 31, 2003, i.e. covering the whole autumn and parts of the summer and winter. The air temperatures were measured every hour on a microclimate scale, at four points within this densely populated shantytown and, as a control, on a tree-lined street nearby. RESULTS In the summer, the average hourly temperatures in the shantytown were between 18.5 degrees C and 29.5 degrees C but, away from it, they were 2 degrees C to 3 degrees C lower at the hottest times of the day. In the autumn, the temperatures ranged from 15.5 degrees C to 25.5 degrees C and in the winter, 13.5 degrees C to 25.5 degrees C. The chilliest time in the shantytown was before dawn in the autumn and at 7 a.m. in the winter. The temperature variation was greater inside the shantytown than outside of it. The temperatures were within the comfort range for around 50% of the time. Temperatures below the lower limit (18 degrees C) were more frequent than those above the upper limit (24 degrees C). Temperatures above the upper limit were more frequent in the shantytown than outside of it. CONCLUSIONS The land occupation is a temperature differentiation factor. In the shantytown, the temperatures were higher during the daytime (by up to 3 degrees C) and lower at nighttime (by 1 degrees C on average). The shantytown environment accentuated the temperature extremes, while the temperatures in the control street were milder.
منابع مشابه
Alterações da temperatura em ambientes externos de favela e desconforto térmico Temperature modifications in shantytown environments and thermal discomfort RESUMO
OBJECTIVE: To study aspects of the microclimate in a shantytown (favela), in order to understand the influence of the land occupation pattern on its climatic parameters. METHODS: The study was carried out in a shantytown located in the southwestern region of the city of São Paulo, Brazil, between February 19 and July 31, 2003, i.e. covering the whole autumn and parts of the summer and winter. T...
متن کاملبررسی کاربرد پذیری شاخص حرارتی ناراحتی اصلاح شده(MDI) در مشاغل روباز: مطالعه موردی معادن روباز استان تهران
Background and aims: Regarding development of several thermal indices and limitations of these indexes, in this research we were examined the applicability and validity of Modified discomfort index (MDI) in Outdoor occupational environments. Methods: This cross-sectional study was done on 175 subjects in summer (2016) in 12 mines construction materials of Tehran Province. Environmental...
متن کاملUse of Becker and neurotic pressure bioclimatic indices in the Assessment of Thermal Comfort in Outdoor Environments based on Meteorological Data: Case Study in Three Different Climates of Iran
Background and aims: lack of thermal comfort in outdoor environments, can cause disorders and diseases, negative impact on productivity and performance, and even can cause death. Therefore, it is important to evaluate it. Various indices and models have been used to assess the level of comfort of humans. In most evaluations has been tried to estimate the comfort level using meteorological data ...
متن کاملModeling Thermal Comfort in Stratified Environments
Some HVAC systems save energy by creating stratified air temperature distributions in which the occupied lower regions are cooler and the upper regions warmer. Comfort standards prescribe a 3°C limit to vertical stratification, independent of where the mean temperature is relative to the comfort zone. This paper evaluates thermal comfort in stratified environments using a model developed to pre...
متن کاملreview of the mechanical and thermal properties of high temperature Diboride ceramics
Ceramic borides, carbides and nitrides with high melting point, relatively good resistance to oxidation and corrosive environments are considered by many researchers in various high temperature industries, which is known from the family of materials as high temperature ceramic (UHTC). To be. All UHTCs have very strong bonds that give them structural stability at high temperatures, and among the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Revista de saude publica
دوره 40 4 شماره
صفحات -
تاریخ انتشار 2006