Error Control Coding for Flash Memory
نویسنده
چکیده
Error control code (ECC) is extensively used in high-speed wireless/wired communication system, magnetic disk, and optical disc (Lin & Costello, 2004). Also the ECC can efficiently improve data reliability of semiconductor memory system (Fujiwara, 2006). This chapter presents error control coding techniques for flash memory and solid-state drive (SSD). This chapter begins with brief introduction of error sources in the flash memory, and then provides fundamental mathematics of the ECC, followed by constructions of practical ECCs.
منابع مشابه
Trends in Machine Learning for Signal Processing
SP AND ERROR CORRECTION FOR NONVOLATILE MEMORY DEVICES Nonvolatile storage devices in the form of NAND flash memories and solidstate drives have become the storage techniques of choice in many mobile and portable devices. The continued density growth of these devices has been mainly driven by aggressive technology scaling and the use of multilevel per-cell techniques. However, bit errors are be...
متن کاملError Control Schemes for Modern Flash Memories: An Overview
Dramatic improvement in Flash technology over the course of the last decade has led to cheaper and denser Flash devices. The great expansion in information capacity in Flash devices mandates the use of improved error-correcting codes, in terms of both efficiency and reliability. This trend is likely to continue as we transition from single-level cell (SLC) Flash memories to increasingly dense m...
متن کاملPolar-Coded Forward Error Correction for MLC NAND Flash Memory Polar FEC for NAND Flash Memory
With the ever-growing storage density, high-speed, and low-cost data access, flash memory has inevitably become popular. Multi-level cell (MLC) NAND flash memory, which can well balance the data density and memory stability, has occupied the largest market share of flash memory. With the aggressive memory scaling, however, the reliability decays sharply owing to multiple interferences. Therefor...
متن کاملBidirectional Limited-Magnitude Error Correction Codes for Flash Memories
a BRDF (Bi-Directional Reflection Distribution Function) that measures the Modulation and Coding Techniques for Enhancing Flash Memory Endurance Such code is called an error correcting write-once memory code. rate-limited frameworks, that have treated packet loss, quantization error and delay separately. of magnitude greater than the typical clock-cycle time of the SSD the latency of sluggish N...
متن کاملJoint Rewriting and Error Correction in Flash Memories
The current NAND flash architecture requires block erasure to be triggered in order to decrease the level of a single cell inside a block. Block erasures degrade the quality of cells as well as the performance of flash memories. One solution is to model flash memories as write-once memories (WOM) where the level of a cell can only be increased. Various coding schemes for WOM can then be applied...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012