Analytical methods for mercury analysis in coal and coal combustion by-products

نویسندگان

  • M. Antonia López-Antón
  • Mercedes Díaz-Somoano
  • Raquel Ochoa-González
  • M. Rosa Martínez-Tarazona
چکیده

This review deals with the analysis of mercury present in different types of solid, liquid and gaseous samples involved in the coal combustion process, focusing on the specific characteristics of each type of sample and the problems typically associated with these products. The main aim of the paper is to describe the methods that, at the current stage of development, are preferable in each case (i.e. the most frequently used in most laboratories and the standard methods). The advantages and disadvantages of each method are discussed with reference to the quality of the results and the uncertainties involved in the evaluation of mercury behaviour during coal combustion processes.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Applying rock engineering systems (RES) approach to evaluate and classify the coal spontaneous combustion potential in Eastern Alborz coal mines

Subject analysis of the potential of spontaneous combustion in coal layers with analytical and numerical methods has been always considered as a difficult task because of the complexity of the coal behavior and the number of factors influencing it. Empirical methods, due to accounting for certain and specific factors, have not accuracy and efficiency for all positions. The Rock Engineering Syst...

متن کامل

A comprehensive study on the effect of moisture content on coal spontaneous combustion tendency

There are several phenomenons for polluting the environment, especially in coalfields; which coal spontaneous combustion is one of them. The moisture content is one of the intrinsic characteristics of coal, which has an important role in the occurrence of this phenomenon. Therefore, this research predicts the coal spontaneous combustion tendency based on moisture content. The percentage of mois...

متن کامل

Automated Analytical Scanning Electron Microscopy and Image Analysis Methods for Characterizing the Inorganic Phases in Coal and Coal Combustion Products

Particle-byparticle scanning electron microscopy (PBPSEM) and scanning electron microscopy point count (SEMPC) are being developed and applied for characterizing the inorganic phases in coal and coal combustion products. PBPSEM sizes, identifies, and quantifies coal mineral constituents and the degree of mineral-coal association. SEMPC determines the chemical composition and abundance of inorga...

متن کامل

Quantification of radionuclides and associated radiological risk estimation of coal combustion residues from a South African coal-fired power plant

Background: Radionuclides occur in coal combustion residues, such as fly ash and bottom ash, which are by-products of coal combustion. They pose potential radiological risks to people present in the surrounding areas. Materials and Methods: Gamma spectrometry was performed to determine the radionuclide activity concentrations in a coal-driven power plant located in the Limpopo province, South A...

متن کامل

Study of mercury in by-products from a Dutch co-combustion power station.

Fly ashes and gypsum are one of the main wastes produced in coal-fired power stations which may be sent to landfills for their disposal. In this work, leaching and speciation of mercury in fly ashes and gypsum from a modern co-combustion power plant equipped with a selective catalytic reduction (SCR) unit in the Netherlands were studied. The mercury leachable contents were checked against diffe...

متن کامل

ذخیره در منابع من

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014