Challenges to the Fermilab Linac and Booster Accelerators*
نویسنده
چکیده
A report on the challenges confronting the Fermilab Linac and Booster accelerators is presented. Plans to face those challenges are discussed. Historically, the Linac/Booster system has served only as an injector for the relatively low repetition rate Main Ring synchrotron. With construction of an 8 GeV target station for the 5 Hz MiniBooNE neutrino beam and requirements for rapid multi-batch injection into the Main Injector for the NUMI/MINOS experiment, the demand for 8 GeV protons will increase more than an order of magnitude above recent high levels. To meet this challenge, enhanced ion source performance, better Booster orbit control, a beam loss collimation/localization system, and improved diagnostics are among the items being pursued. Booster beam loss reduction and control are key to the entire near future Fermilab high energy physics program.
منابع مشابه
The Proton Driver at Fermilab
A document titled \The Proton Driver Design Study" has recently been completed at Fermilab [1]. It describes in detail the design of a new brighter booster, called the Proton Driver, as a complete functional replacement for the present Booster. The Proton Driver is a rapid-cycling high-intensity 16 GeV synchrotron. The main design goals are: (i) 1 MW beam power; (ii) 1 ns (rms) bunch length; an...
متن کاملStatus of the Proton Driver Study at Fermilab
In order to enhance Fermilab hadron research program and to provide a proton source to a future muon storage ring or a muon collider, the study of a new high intensity proton machine called the Proton Driver is being pursued at Fermilab. It would replace the present linac and 8 GeV Booster and produce 20 times the proton intensity as the Booster. This paper gives a status report on a number of ...
متن کاملHigh Current Proton Tests of the Fermilab LINAC
The peak current limit for the Fermilab Linac was recently studied. The purpose was to learn what components of the present Linac can be used for the first stage of a proposed proton driver[1]. For this application the Linac must provide a H beam in excess of 5000 mAμsec per pulse. The original Fermilab Linac was designed for protons with a peak current of 75 mA and a pulse length of four Boost...
متن کاملIntegrable RCS as a proposed replacement for Fermilab Booster
Integrable optics is an innovation in particle accelerator design that potentially enables a greater betatron tune spread and damps collective instabilities. An integrable rapid-cycling synchrotron (RCS) would be an effective replacement for the Fermilab Booster, as part of a plan to reach multi-MW beam power at 120 GeV for the Fermilab high-energy neutrino program. We provide an example integr...
متن کاملReprocessing D0 Data with SAMGrid
The DØ experiment studies proton-antiproton collisions at the Tevatron collider based at Fermilab. Reprocessing, managing and distributing the large amount of real data coming from the detector as well as generating sufficient Monte Carlo data are some of the challenges faced by the DØ collaboration. SAMGrid combines the SAM data handling system with the necessary job and information management...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2001