Development of ground-testable phase fresnel lenses in silicon
نویسندگان
چکیده
Diffractive optics, such as Phase Fresnel Lenses (PFL’s), offer the potential to achieve excellent imaging performance in the x-ray and gamma-ray photon regimes. In principle, the angular resolution obtained with these devices can be diffraction limited. Furthermore, improvements in signal sensitivity can be achieved as virtually the entire flux incident on a lens can be concentrated onto a small detector area. In order to verify experimentally the imaging performance, we have fabricated PFL’s in silicon using gray-scale lithography to produce the required Fresnel profile. These devices are to be evaluated in the recently constructed 600-meter x-ray interferometry testbed at NASA/GSFC. Profile measurements of the Fresnel structures in fabricated PFL’s have been performed and have been used to obtain initial characterization of the expected PFL imaging efficiencies.
منابع مشابه
Designing the optimal Fresnel lenses by using Zemax software
In this paper, the optimal Fresnel lenses are designed by Zemax software.The fundamental problem of the Fresnel lenses is the beam divergence, which wasresolved by decreeing the output stain diameter on the image plane. For this purpose,two types of radial and cylindrical Fresnel lenses are simulated with different groovesusing Global and Hammer optimization methods. The minimum output stain di...
متن کاملThe study of Lysozyme adsorption onto 2-hydroxyethylmethacrylates and Silicon Hydrogel Contact Lenses
In order to increase the water content and the oxygen permeability of hydrogels used in themanufacture of contact lenses, the polar monomer Silicon Hydrogel Contact Lenses (SHCL), and 2-hydroxyethyl methacrylate (HEMA) were copolymerized with the hydrogels. Due to the presence ofpolar monomers in the conventional contact lenses, the major component of the human tear,lysozyme is extensively adso...
متن کاملA Nipkow disk integrated with Fresnel lenses for terahertz single pixel imaging.
We present a novel Nipkow disk design for terahertz (THz) single pixel imaging applications. A 100 mm high resistivity (ρ≈3k-10k Ω·cm) silicon wafer was used for the disk on which a spiral array of twelve 16-level binary Fresnel lenses were fabricated using photolithography and a dry-etch process. The implementation of Fresnel lenses on the Nipkow disk increases the THz signal transmission comp...
متن کاملMultilevel silicon diffractive optics for terahertz waves
A multilevel microfabrication process has been developed to produce silicon Fresnel lenses for terahertz waves. A repeated binary fabrication process was used to create lenses with up to eight levels in complexity and these lenses have been compared to both less complex structures and refractive optic lenses. The microfabrication required deep reactive ion etching and multilevel resist processi...
متن کاملElectrically switchable cylindrical Fresnel lens based on holographic polymer-dispersed liquid crystals using a Michelson interferometer
Fabricating an electrically switchable cylindrical Fresnel lens based on holographic polymer-dispersed liquid crystals (H-PDLC) using a Michelson interferometer is reported. Simplicity of the method and possibility of fabricating different focal length lenses in a single set up are among the advantages of the method. It is demonstrated that the Fresnel structured zone plate acts as a cylindrica...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2006