Rolling active control for an aircraft of seamless aeroelastic wing

نویسندگان

  • Zhengjie Wang
  • Daqing Yang
  • Shijun Guo
چکیده

This paper presents an investigation into the controllability for an aircraft of seamless aeroelastic wing. The research is aimed at the design of control laws for the aircraft rolling by actively operating a pair of an unconventional hingeless flexible leading and trailing control surfaces at different flight speed. The main challenge is how to achieve a specified rolling rate for the aircraft when the control effectiveness drops down and even crosses over the rolling reversal point within the flight envelope. This phenomenon is mainly due to the aeroelastic effect of the large sweptback and highly flexible wing design for weight saving. The investigation shows that control laws varying with the flight speed can be designed to achieve the rolling control target.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Robust MRAC for a Wing Rock Phenomenon in Delta Wing Aircrafts

Wing rock phenomenon is an undesired motion appears in high angles of attack where a rolling in the aircraft in positive and negative roll angles with specified amplitude and frequency is occurred. In this paper two adaptive controllers suggested to control the rolling dynamics under wing rock phenomenon for a delta wing aircraft with presence of disturbance. Disturbance was considered as unmat...

متن کامل

Aeroelastic Roll Control for High Aspect Ratio Wings

The undersigned hereby certify that they have read and recommend to the Faculty of Aerospace Engineering for acceptance a thesis entitled " Aeroelastic Roll Control for High Aspect Ratio Wings " Summary Modern aircraft tend to be light and slender. The high aspect ratio reduces the induced drag, increase fuel efficiency, and provide enough lift at low speeds. Therefore such wing types are used ...

متن کامل

An Integrated Trim and Structural Design Process for Active Aeroelastic Wing Technology

A new method for concurrent trim and structural optimization of Active Aeroelastic Wing technology is presented. The new process treats trim optimization and structural optimization as an integrated problem in the same mathematical formulation, in which control surface gear ratios are included as design variables in a standard structural optimization algorithm. This new approach is in contrast ...

متن کامل

Aeroelastic Modeling of Elastically Shaped Aircraft Concept via Wing Shaping Control for Drag Reduction

Lightweight aircraft design has received a considerable attention in recent years as a means for improving cruise efficiency. Reducing aircraft weight results in lower lift requirements which directly translate into lower drag, hence reduced engine thrust requirements during cruise. The use of lightweight materials such as advanced composite materials has been adopted by airframe manufacturers ...

متن کامل

A Preliminary Study for Optimal Longitudinal-Mode Flight Control through Distributed Aeroelastic Shaping

The emergence of advanced lightweight materials is resulting in a new generation of lighter, flexible, more-efficient airframes that are enabling concepts for active aeroelastic wing-shape control to achieve greater flight efficiency and increased safety margins. These elastically shaped aircraft concepts require non-traditional methods for large-scale multiobjective flight control that simulta...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • IJMIC

دوره 7  شماره 

صفحات  -

تاریخ انتشار 2009