Single Inductor Dual Output
نویسنده
چکیده
منابع مشابه
A Power Factor Correction Using Single-Inductor Dual-Output,... R.Kumaresan,et al,.
A Power Factor Correction Using singleinductor dual-output buck-boost converter operating in critical conduction mode is proposed in this paper. Each output of the SingleInductor Dual-Output buck-boost converter can be regulated independently by multiplexing a single inductor, Compared with a conventional two-stage multiple-output converter, the singleinductor dual-output buck-boost converter b...
متن کاملA 200-mA, 93% peak power efficiency, single-inductor, dual-output DC–DC buck converter
A single-inductor dual-output (SIDO) DC–DC buck converter is presented. The circuit uses only one (external) inductor to provide two independent output voltages ranging from 1.2 V to the power supply (2.6–5 V) with a maximum total output current of 200 mA. The proposed converter has been fabricated in a 0.35-lm p-substrate CMOS technology. Measurement results demonstrate that a peak power effic...
متن کامل“ A Single Inductor Dual Output Fly Back Power Factor Correction
The Designing of a single-inductor dual output (SIDO) fly-back power factor correction (PFC) converter is proposed, in which the multiplexing of a single-inductor is implemented with fly back converter through which each output can be regulated independently. The converter will be operating under in critical conduction mode (CRM).The efficiency along with power factor, total harmonic distortion...
متن کاملSingle-Inductor Dual-Output Buck-Boost Power Factor Correction Converter
In this paper a single-inductor dual-output (SIDO) buck-boost PFC converter operating in critical conduction mode (CRM) is proposed. By multiplexing a single inductor, each output of SIDO buck-boost converter can be regulated independently. Compared with conventional two-stage multiple output converter, SIDO buck-boost PFC converter benefits from significant overall cost saving, small size and ...
متن کاملA PWM Dual-Output DC/DC Boost Converter in a 0.13μm CMOS Technology for Cellular- Phone Backlight Application
This integrated single inductor dual-output boost DC/DC converter provides two independently regulated outputs with maximum efficiency at 83%. The converter operates in PWM and discontinuous mode at 500kHz using a 6.8uH inductor. Each output is time-multiplexed and regulated via current mode control. A drain-extended 0.13um technology allows backlight application up to 11V operation. The chip o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009