A Study on Miniaturization of Bow-Tie Antenna with Folded Elements
نویسندگان
چکیده
Bow-tie antenna is one of wideband antennas [1]. It has been reported that the bow-tie antenna has been miniaturized by adding folded elements [2]. In this paper, it is shown that bending the bow-tie antenna with folded elements is effective method for miniaturization. The bent bow-tie antenna with folded elements can be more miniaturized than conventional bow-tie antenna with folded elements, while maintaining the broadband characteristic.
منابع مشابه
Design and Implementation of a Compact Super-Wideband Printed Antipodal Antenna Using Fractal Elements
A compact printed fractal antipodal bow-tie antenna is designed and implemented to simultaneously cover the operations in the C, X, and Ku-bands. It is demonstrated that by addition of small fractal elements at the sides of hexagonal arms of the bow-tie, a wide operating frequency range of 3.3 to 19.1 GHz can be covered while antenna size is only 30×34×1.2 mm3. In order to match the antenna to ...
متن کاملUWB Planar Conical Horn-Shaped Self-Complementary Bow-Tie Antenna
An ultra-wideband (UWB) self-complementary planar bow-tie antenna (SCPBTA) is proposed. The antenna consists of a printed conical horn-shaped (CHS) radiator and a counterpart CHS slot etched on a rectangular ground plane. The printed CHS radiator is connected directly to the 50Ω microstrip line by bending the end portion of the feed line. As a result, the antenna has a simple structure which do...
متن کاملWideband Microstrip-fed Printed Bow-tie Antenna for Phasedarray Systems
A micro strip-fed printed bow-tie antenna is presented inorder to achieve wide bandwidth, high gain, and size reduction. A comparisonbetween the bow-tie and the quasi-Yagi (dipole and director)antennas shows that the bow-tie antenna has a wider bandwidth, highergain, lower front-to-back ratio, lower crosspolarization level, andsmaller size. Two-element arrays are designed and their characterist...
متن کاملWideband Microstrip-fed Printed Bow-tie Antenna for Phased- Array Systems
A microstrip-fed printed bow-tie antenna is presented in order to achieve wide bandwidth, high gain, and size reduction. A comparison between the bow-tie and the quasi-Yagi (dipole and director) antennas shows that the bow-tie antenna has a wider bandwidth, higher gain, lower front-to-back ratio, lower cross-polarization level, and smaller size. Two-element arrays are designed and their charact...
متن کاملCoplanar Waveguide Fed Bow-tie Slot Antennas for Wideband Operations
A bow-tie slot antenna with tapered connection to a 50Ω coplanar waveguide (CPW) feed line is introduced and its dimensional parameters have been studied for wideband operations in the X-band. A set of two element bow-tie slot antennas fed by one CPW is also introduced for wider bandwidth and improved gain. The configuration of one CPW feeding two elements of this antenna is simulated and it ac...
متن کامل