Focal cryotherapy: step by step technique description

نویسندگان

  • Cristina Redondo
  • Victor Srougi
  • José Batista da Costa
  • Mohammed Baghdad
  • Guillermo Velilla
  • Igor Nunes-Silva
  • Sebastien Bergerat
  • Silvia Garcia-Barreras
  • François Rozet
  • Alexandre Ingels
  • Marc Galiano
  • Rafael Sanchez-Salas
  • Eric Barret
  • Xavier Cathelineau
چکیده

INTRODUCTION AND OBJECTIVE Focal cryotherapy emerged as an efficient option to treat favorable and localized prostate cancer (PCa). The purpose of this video is to describe the procedure step by step. MATERIALS AND METHODS We present the case of a 68 year-old man with localized PCa in the anterior aspect of the prostate. RESULTS The procedure is performed under general anesthesia, with the patient in lithotomy position. Briefly, the equipament utilized includes the cryotherapy console coupled with an ultrasound system, argon and helium gas bottles, cryoprobes, temperature probes and an urethral warming catheter. The procedure starts with a real-time trans-rectal prostate ultrasound, which is used to outline the prostate, the urethra and the rectal wall. The cryoprobes are pretested and placed in to the prostate through the perineum, following a grid template, along with the temperature sensors under ultrasound guidance. A cystoscopy confirms the right positioning of the needles and the urethral warming catheter is installed. Thereafter, the freeze sequence with argon gas is started, achieving extremely low temperatures (-40ºC) to induce tumor cell lysis. Sequentially, the thawing cycle is performed using helium gas. This process is repeated one time. Results among several series showed a biochemical disease-free survival between 71-93% at 9-70 month- follow-up, incontinence rates between 0-3.6% and erectile dysfunction between 0-42% (1-5). CONCLUSIONS Focal cryotherapy is a feasible procedure to treat anterior PCa that may offer minimal morbidity, allowing good cancer control and better functional outcomes when compared to whole-gland treatment.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Dimensional accuracy of three impression materials by one-step and two-step impression techniques: An in vitro study

Introduction: An accurate impression is essential to create a well-fitted dental prosthesis. This study aimed to compare the dimensional accuracy of three elastomeric materials using one-step and two-step impression techniques. Methods: In this study, 20 impressions were fabricated for each Vinyl siloxane ether (Identium), condensation silicone (Speedex), and a...

متن کامل

Fabrication of polymer-SiO2 nanocomposite optical fibers with a new method

At first step polymer optical fibers (POFs) are used in short distance for optical data transmissions. At second step SiO2 nanoparticles were prepared by sonochemical-assisted method. Silica nanoparticles were added to polymer matrix to prepare polymer based nanocomposites. Most of the POF applications are in the medical and electrical devices. There are several methods for fabrication of POFs,...

متن کامل

Salvage cryotherapy for recurrent prostate cancer after radiation failure: current status and future perspectives

10.2217/14750708.5.1.37 © 20 In the last decade, cryotherapy has emerged as a minimally invasive alternative for the treatment of localized or locally advanced prostate cancer. With better understanding of the pathophysiology of cryogenic injury and the introduction of the gas-driven systems, the procedure has been optimized to improve patient survival and reduce complication. The results of sa...

متن کامل

Enhancement of Heat Transfer over a Double Forward Facing Step with Square Obstacle through Taguchi’s Optimization Technique

In this paper, the heat transfer to the fluid, passing through the double forward facing step (FFS) channel with square obstacle is enhanced by Taguchi’s S/N ratio analysis. Flow through the forward facing step channel has a wide range of applications in thermal systems due to its flow separation and subsequent reattachment, which in turn enhances the heat transfer. Flow separation and reattach...

متن کامل

Theorical Investigation of Linear Response for Passivated Metallic Electrode Under Potential Step (RESEARCH NOTE)

The transient response of passivated metallic electrode system under potential step was analyzed based on a linear model, and a technique for calculating the parameters characterizing the growth and dissolution of passive film was proposed. It is believed that the information which is expected to be gained from the impedance measurement can be obtained by this technique and that this technique ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 43  شماره 

صفحات  -

تاریخ انتشار 2017