Controlled Fabrication System of Fabry-perot Optical Fiber Sensors
نویسندگان
چکیده
i Controlled Fabrication System of Fabry-Perot Optical Fiber Sensors by Wei Huo Anbo Wang, Chairman The Bradley Department of Electrical and Computer Engineering, Virginia Tech
منابع مشابه
Chronology of Fabry-Perot Interferometer Fiber-Optic Sensors and Their Applications: A Review
Optical fibers have been involved in the area of sensing applications for more than four decades. Moreover, interferometric optical fiber sensors have attracted broad interest for their prospective applications in sensing temperature, refractive index, strain measurement, pressure, acoustic wave, vibration, magnetic field, and voltage. During this time, numerous types of interferometers have be...
متن کاملDesign of Optical Fiber Fabry-Perot Sensors Based on Intensity and Phase with Parallel Processing
For fiber Fabry-Perot sensor vulnerable to external parameters such as electromagnetic, noise and displacement impact, reducing the problem resilience, research and design new fiber Fabry-Perot sensor with parallel processing capabilities based on the intensity and phase of perception. First, according to various types of external parameters and the degree of interference, established the inten...
متن کاملPassive Network of Fabry-Perot based Sensors with Wavelength Multiplexing Capabilities
We introduce a technology for robust and low maintenance sensor networks capable of detecting micro-g accelerations in a wide frequency bandwidth (above 1,000 Hz). Sensor networks with such performance are critical for navigation, seismology, acoustic sensing, and for the health monitoring of civil structures. The approach is based on the fabrication of an array of highly sensitive acceleromete...
متن کاملChitosan Layer Fabry - Perot Interferometer - Based Optical Fiber Sensor for Cadmium Ion Detection
Optical sensors based on Fabry-Perot interferometer to detect cadmium ions is proposed. The sensor was fabricated by coating the tip of the optical fiber by chitosan. The two chitosan surfaces serve as mirrors which form a Fabry-Perot interferometer. The characterization results indicate that the sensor has a linear response with sensitivity of 0.0884 dBm/ppm with a correlation factor of 0.9665...
متن کاملA Miniature Fiber Optic Refractive Index Sensor Built in a MEMS-Based Microchannel
A small, highly sensitive, and electromagnetic interference (EMI)-immune refractive index (RI) sensor based on the Fabry-Perot (FP) interferometer is presented. The sensor's FP cavity was fabricated by aligning two metal-deposited, single-mode optical fiber endfaces inside a microchannel on a silicon chip. The mirrors on the fiber endfaces were made of thermal-deposited metal films, which provi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2000