Production of Nitrogen Acceptors in ZnO by Thermal Annealing
نویسندگان
چکیده
منابع مشابه
Effect of Laser Annealing on Optical Properties of Ion-Implanted ZnO Nanorods
We report on the demonstration of the effectiveness of nanosecond laser annealing on optical properties of phosphorus ion (P)-implanted ZnO nanorods (NRs). Vertically-alligned ZnO NRs have been synthesized by nanoparticle-assisted pulsed laser deposition (NAPLD) on c-plane sapphire substrates. The pre-laser annealing was performed with the third harmonic (355 nm) of a Qwitched Nd:YAG laser at a...
متن کاملn-ZnO nanorods/p+-Si (111) heterojunction light emitting diodes
In this study, we report the effects of thermal annealing in nitrogen ambient on the optical and electrical properties of zinc oxide (ZnO) nanorod (NR) arrays for the application in light emission diodes (LED). The single-crystalline ZnO NR array was synthesized on p+-Si (111) substrate without seed layer using simple, low-cost, and low-temperature hydrothermal method. The substrate surface was...
متن کاملOptical and photocatalytic properties Undoped and Mn-doped ZnO nanoparticles synthesized by hydrothermal method: Effect of annealing temperature
Undoped and Mn-doped ZnO nanoparticles were successfully prepared by the hydrothermal method with different annealing temperature conditions. Structural, chemical and optical properties of the samples were studied by X-ray diffraction (XRD), Field Emission scanning electron microscopy (FESEM), UV-Vis spectrophotometry and Fourier transform infrared (FT-IR) spectroscopy. The phase purity was con...
متن کاملOptical and photocatalytic properties Undoped and Mn-doped ZnO nanoparticles synthesized by hydrothermal method: Effect of annealing temperature
Undoped and Mn-doped ZnO nanoparticles were successfully prepared by the hydrothermal method with different annealing temperature conditions. Structural, chemical and optical properties of the samples were studied by X-ray diffraction (XRD), Field Emission scanning electron microscopy (FESEM), UV-Vis spectrophotometry and Fourier transform infrared (FT-IR) spectroscopy. The phase purity was con...
متن کاملThe Effects of Nitrogen Addition on the Production of Ultrafine/Nano Grained AISI 201L Stainless Steel by Advanced Thermo-mechanical Process
In this study, the effects of nitrogen addition on the production of ultrafine/nano grained AISI 201L stainless steel by advanced thermo-mechanical process were investigated. Cast samples were first homogenized at 1200 °C for 4 h, hot-rolled at 1100 °C and finally, solution-annealed at 1150 °C for 2.5 h. Unidirectional and cross multipass cold rolling at 25 °C was carried out to 90% reduction i...
متن کامل