Fly Ash & Sulphur
ثبت نشده
چکیده
s92,1 15363,1980.search, April 1981. 59. “Recyclers Beat the Clock.” Engineering News Record,November 6,1980. 60. “D-Cracked Concrete Pavement Recycled for Less.” Highway andHeavy Construction, April 1981. 61. “Asphalt Pavement Milled and Recycled on Same Project.” Highway and Heavy Construction, August1981. 62. “In Place Recycling Cuts Paving Cost, Time.” Highway and HeavyConstruction, June 1981. 63. “Hawaii Places First Recycled Asphalt.” Highway and Heavy Con-struction, April I 981. 64. “Chrome Aggregate Used in Place of Limestone.” Highway and Heavy Construction, August1981.
منابع مشابه
Environmental Assessment of Bottom Ash from Canadian Coal-Fired Power Plants
Bottom ashes collected from ESP and baghouse of seven pulverized coal-fired power plants using subbituminous and bituminous coal and a fluidized bed combustor using crushed bituminous coal were examined for their mineralogy and elemental composition. The results presented in this paper are based on the average of three samples collected from each power plant. The mineralogy of each sample was d...
متن کاملRole of Electrostatic Precipitator in Industry
Electrostatic Precipitators (ESP) are most important device used to control the pollution by collecting dust particles present on flue gases. In power plants, Coal used in Indian thermal power stations is of inferior grade, at power plant flue gas is often treated with a series of chemical process and scrubbers, having low calorific value (3500-4500)kcal/kg and high ash content due to drift ori...
متن کاملAgricultural use of fly ash: Expected benefits and consequences
Coal is one of the largest sources of energy production in the world accounting in 2006 for about 25% of the world’s primary energy supply, that amounts to almost with a worldwide consumption of 3,090 million tons of oil equivalent. Fly ash (FA), is a residue of coal combustion consisted of amorphous ferro-alumino silicate minerals with a matrix very similar to soil. Its elemental composition i...
متن کاملAsh and sulphur removal from bitumen using column flotation technique: Experimental and response surface methodology modeling
This study investigates removing ash and pyrite sulphur from bitumen by column flotation process. Central composite design (CCD) of response surface methodology (RSM) was applied for modeling and optimization of the percentage of ash and pyrite sulphur removal from bitumen. The effects of five parameters namely the amounts of collector and frother agents, particle size, wash water rate and feed...
متن کاملSimultaneous Ash and Sulphur Removal from Bitumen Using Column Flotation Technique: Experiments, RSM Modeling and Optimization
An efficient method was employed for the ash and pyrite sulphur removal from bitumen using column flotation process. The bitumen samples containing 9.6% sulphur (6.81% in the pyrite sulphur form) and 26.4% ash were successfully showed up to 75.20% of pyrite sulphur (e.g.; 51.66% of total sulphur) and 70.81% of ash removal. The Box-Behnken Design (BBD) was employed to design the experiments, to ...
متن کاملPhotocatalytic removal of o-chlorophenol by Using a Mixture of Modified Fly Ash and TiO2 Nanoparticles
Abstract Background: Photocatalytic process is used as a suitable method for o-chlorophenol removal. In this study, the efficiency of a mixture of modified fly ash and TiO2 nanoparticles in photocatalytic removal of o-chlorophenol was evaluated. Methods: After acid washing of fly ash, the absorbent was oxidized with potassium permanganate. ...
متن کامل